PQ-FT series floating fountain aerator

The water convection form of fountain aerator enables the exchange of surface water and bottom water during the process of making vertical circulating flow. Fresh oxygen is fed into the bottom of the lake to form an oxygen rich layer at the bottom of the lake, digest and decompose the pollutants deposited at the bottom, exhaust gas is carried out from the water, and the low temperature water at the bottom is transported to the surface. After that, the surface water temperature is adjusted to inhibit the propagation and growth of algae on the surface of the water body, improve the micro ecological environment, strengthen the self purification capacity of the water body, and improve the water quality in the short term.

The PQ-FT series fountain aerator has the following water purification effects:

1. Promote the up and down circulation of water bodies, improve water mobility, and reduce dead corners of water bodies;

3. Enhance microbial activity and reproductive capacity in sediment, accelerate the decomposition of pollutants;

4. Quickly remove sulfides, methane, and ammonia generated from sediment to reduce water odor;

5. Eliminate the natural thermocline of water bodies and reduce the temperature difference between the upper and lower layers of water bodies;

6. The spraying pattern creates a wave effect, which helps to disperse algae and suppress mosquito breeding.

PQ-FT series floating fountain aerator features:

The PQ-FT fountain aerator is an integrated machine consisting of an underwater motor, a "UV+oxidation+impact resistant" engineering PE plastic float, and an oxygenation nozzle.

Integrated construction, small size, easy to install; Floating installation, no need to install foundation;

Fixed and easy to move according to needs; Overall floating, with no impact from water level fluctuations;

No vulnerable parts, reducing maintenance cycles; There are many styles of water splashes, which can be selected according to the environment.

Flow circulation, open impeller, is the oxygenation effect of ordinary aerators.

Equipment parameters and selection:

Before selecting the PQ-FT fountain aerator, it is necessary to first clarify the oxygen demand, water level size, and depth structure of the water body.

Application scope of PQ-FT series fountain aerator

Fountain aerators are suitable for golf courses, ecological landscape lakes, rivers, ponds, as well as private courtyard ecological water pools and ornamental fish pools. They purify and maintain water quality through water re oxygenation and water circulation; In addition, when the body is in operation, it will drive the water cycle to supply the oxygen needed for the growth of animals and plants in ecological rivers and lake bottoms, and improve and reduce sediment.

Installation instructions for PQ-FT series fountain aerator equipment

The PQ-FT series fountain aerator is a type of water lifting fountain aerator with two models, suitable for water bodies, playing a role in aeration, oxygenation, and circulation of water bodies.

It is difficult to install aeration or fountain equipment in deep water ponds, but with a floating fountain aerator, you will find that the entire process is easy and the equipment is not affected by changes in water level after installation.

1. Please hire a professional electrician for power installation;

2. The depth of the water body shall not be less than 0.6 meters;

Fixed method:

Adopting plug-in installation - except for equipment and poles, there are no other accessories on the surface of the water body

Installation using anchor stone fixation - except for equipment, there are no visible accessories on the surface of the water body

Attention:

1. The power cord should be a movable rubber sheathed waterproof cable, with one core reliably grounded to the motor casing.

2. The installation depth should be strictly controlled according to the technical parameter table, and the working depth cannot be adjusted arbitrarily.

3. Observe the direction of motor operation within a few seconds after starting up, and adjust it promptly if it reverses.

4. There should be no fiber debris such as metal wires, ropes, plastic bags, etc. in the water body where the equipment operates, in order to avoid entanglement with the impeller and blockage of the inlet and other parts.

5. The equipment is shipped from the factory and can be equipped with an electrical control system. When the control system automatically cuts off the power during operation, the cause should be identified in a timely manner, and the fault should be eliminated before starting. It is strictly forbidden to short circuit before starting and using.