-
E-mail
259665053@qq.com
-
Phone
19355561637
-
Address
Tsinghua Tongfang Technology Building, Haidian District, Beijing
Product Categories
Beijing Qingxiang Technology Research Institute
Paper and Tape Testing Institution Adhesive Testing Report Material Testing Center
NegotiableUpdate on 02/04
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Paper and tape testing institution adhesion testing report Material testing center $r $n Clear Analysis Technology Research Institute can provide relevant testing services such as initial adhesion, holding adhesion, tensile strength, temperature resistance, thickness uniformity, etc. It also provides CMA/CNAS qualification testing reports and has a well-equipped and powerful project testing team with complete laboratory facilities.
Product Details
Paper and Tape Testing Institution Adhesive Testing Report Material Testing Center
The Clear Analysis Technology Research Institute can provide testing services related to the initial adhesion, holding strength, tensile strength, temperature resistance, thickness uniformity, etc. of paper and tape, and provide CMA/CNAS qualification testing reports. The laboratory facilities are complete and the project testing team is strong.
Paper tape testing cycle
Within 7-10 working days after the sample is received (can be expedited), there may be changes based on the sample and its testing items/methods. Specific information needs to be consulted with the engineer.
Paper tape testing process
1. Communication requirements: Understand the items to be tested and determine the scope of testing;
2. Quotation: Provide a quotation based on the testing items and requirements;
3. Signing: Sign a contract and confidentiality agreement to begin testing;
4. Complete testing: The testing cycle may vary depending on the sample and its testing items/methods. Please consult a testing consultant for specific details;
5. Provide testing reports and provide post service;
Paper and tape testing related projects
1. Initial adhesion force: The steel ball rolling method (GB/T4852) is used to measure the minimum adhesion diameter of the adhesive surface to the standard steel ball (unit: mm)
2. Adhesive strength: Record the detachment time (in hours) of the sample under 23 ℃/50% RH conditions using the constant temperature and humidity chamber suspension method (ASTMD3654)
3. Tensile strength: Use a universal material testing machine (GB/T30776) to determine the load at break (unit: N/25mm)
4. Temperature resistance: Verification of the peel strength change rate of the adhesive layer in an environment of -20 ℃~80 ℃ using a high and low temperature alternating test chamber (* * * 29863)
Scope of paper and tape testing
1. Kraft paper tape 2. Meiwen paper tape 3. Double sided paper tape 4. Masking paper tape 5. Conductive paper tape
Related standards for paper and tape testing
1. ASTMD3759/D3759M-19: Testing of Fracture Strength and Elongation of Pressure Sensitive Adhesive Tape
3. GB/T2792-2014: 180 peel strength test for pressure-sensitive adhesive tapes
4. GB/T7125-2015: Test method for thickness of pressure-sensitive adhesive tapes
5. ASTMD1000-17: Test Standard for Pressure Sensitive Adhesive Tape for Electrical Insulation
The above is an introduction to paper tape testing. The Clearing Technology Research Institute is committed to providing technical services such as product research and development, component analysis, formula reduction, material chemical testing, industrial diagnostic failure analysis, simulation calculation testing, large-scale instrument testing, and reliability verification. If you have any testing needs, please feel free to consult.
Paper and Tape Testing Institution Adhesive Testing Report Material Testing Center
