-
E-mail
3007052287@qq.com
-
Phone
13482468385
-
Address
Building 1, No. 188 Xinghuo Road, Qingcun Town, Fengxian District, Shanghai
Product Categories
Shanghai Kaiyuan Automation Technology Co., Ltd
Phoenix Surge Protector PT 2X2-12DC-ST
NegotiableUpdate on 03/04
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Phoenix surge protector PT 2X2-12DC-ST $r $nPT 2X2-12DC-ST - Surge protector - plug-in plug $r $n2838254 $r $nPT protection plug, with protection circuit, used for two 2-wire floating ground signal circuits. Rated voltage of 12V DC. HART compatible.
Product Details
Phoenix Surge Protector PT 2X2-12DC-ST
PT 2X2-12DC-ST - Surge protector - plug-in component
2838254
PT protection plug with protection circuit, used for two 2-wire floating ground signal circuits. Rated voltage of 12V DC. HART compatible.
Phoenix Surge Protector PT 2X2-12DC-ST
Product Details
| Product Type | Surge protection for measurement and control technology |
| Product Series | PLUGTRAB PT |
| IEC category | C1 |
| C2 | |
| C3 | |
| D1 | |
| type | pin-type |
| Surge protection fault alarm | none |
| CheckMASTER software can be used to test the protector: | Applicable to SW rev. 1.00 and higher versions |
| Wire pairs for each module | 2 |
| Insulation characteristics | |
| Overvoltage category | III |
| Rated voltage UN | 12 V DC |
| connection method | Screw connection (connection to base) |
| thread | M3 |
| tightening torque | 0.8 Nm |
| Cross section of flexible wire | 0.2 mm² . .. 2.5 mm² |
| Rigid wire cross-section | 0.2 mm² . .. 4 mm² |
| Connectable guide cross-section AWG | 24 . .. 12 |
| Size chart | |
| width | 17.5 mm |
| height | 44.8 mm |
| depth | 51.7 mm |
| Horizontal needle spacing | 1 partition |
| Complete module width | 17.7 mm |
| Complete module height | 90 mm |
| Complete module depth | 65.5 mm |
| color | Black (RAL 9005) |
| copper | |
| Flame retardant rating, compliant with UL 94 | V-0 |
| housing material | PA 6.6 |
| mechanical parameters | |
| Open side panel | No |
| environmental conditions | |
| protection level | IP20 |
| Environmental temperature (operating) | -40 °C . .. 85 °C |
| Electrical clearance and creepage distance | |
| Standards/regulations | VDE 0110-1 / IEC 60664-1 |
| Standard Information Technology Specifications | |
| Standards/regulations | IEC 61643-21 |
| DIN EN 61643-21 | |
| UL 497B | |
| IEC 61643-21 | |
| DIN EN 61643-21 | |
| UL 497B | |
| Installation Type | Installed on the base |
Compatible products
advantage
Using a "hot" plug-in protection module, testing and recording can be easily and simply carried out with CheckMASTER 2
Maintainability achieved through a two-piece design
The product range is complete, and products can be selected for all possible requirements in MCR applications
The impedance neutral plug is used and the protective connector is removed, so the signal will not be affected during maintenance
