Powder cyclone recycling equipment

Powder cyclone recycling equipmentMainly used in the process of electrostatic powder spraying on workpieces. Due to the fact that a large portion of the powder is not fully utilized after spraying, if not treated in a timely manner, it will not only cause air pollution but also waste resources. This device can effectively recover and reuse powder that has not been sprayed onto the surface of the workpiece.

The workpiece running with the chain, during the powder spraying process in the powder spraying chamber, the powder that is not adsorbed by the workpiece falls to the bottom of the powder spraying chamber. The mushroom head reverse blowing device at the bottom of the powder spraying chamber blows the powder to the recovery port. The powder is sucked into the large cyclone separator for primary recovery with the airflow. The centrifugal force generated by the high-speed rotation of the airflow separates the powder from the air, separates the larger diameter powder and screens it, and then automatically returns to the powder supply bucket for continued use.

The remaining fine powder after separation is fed into the secondary recovery system, separated by filtration, and the clean air is discharged. The ultrafine powder recovered in the secondary stage cannot be recycled and should be cleaned regularly.

　　Powder cyclone recycling equipmentThe general recovery rate will reach 98% or above, and the reuse rate of the remaining powder will also reach about 95%, making it a very effective powder recovery system. This system can not only protect the environment, but also prevent the waste of resources.

Description of Design Features for Large Cyclone Recycling:

A. Reduce powder consumption and save powder;

1. Adopting a separation cyclone, the recovery efficiency reaches over 95%, which greatly saves powder consumption compared to similar equipment.

The design of the entire powder loading room and the arrangement of the spray gun are beneficial for improving the powder loading rate.

B. Easy to clean:

Considering frequent color changes, in the design, we mainly consider the convenience of cleaning:

1. Adopting a two-stage recycling system with a large cyclone, it is one of the fastest color changing recycling systems in China.

2. The small powder hopper below the large cyclone can slide and translate for easy cleaning.

3. The paint booth adopts a circular arc structure, which is easy to clean and conducive to smooth airflow.

4. The conical bucket below the cyclone is positioned higher, making it easier for cleaning personnel to stand under the cyclone for cleaning.

C. Beautiful appearance

The design of the spraying room incorporates the advantages of many powder coating manufacturers around the world, which are beautiful, sturdy, and generous. All sheet metal parts are processed by CNC equipment with fine workmanship.

D. The key mechanical components and all electrical components of the equipment are manufactured using products to ensure reliable and robust operation of the system;