-
E-mail
sales@shyuhu.com
- Phone
-
Address
No. 6898 Linhai Road, Qinggang Industrial Park, Fengxian District, Shanghai
Shanghai Yuhu Self Control Valve Co., Ltd
sales@shyuhu.com
No. 6898 Linhai Road, Qinggang Industrial Park, Fengxian District, Shanghai
![]() |
|---|
| Q944F/PPL/H electric three-way ball valve |
The Q944F/PPL/H electric three-way ball valve from Shanghai Yuhu Company is composed of an intelligent angular stroke actuator and a three-way ball valve. It is a rotary cut-off and regulating valve. The electric three-way ball valve has the advantages of tight closure, compact structure, light weight, and easy maintenance. Electric three-way regulating ball valves are widely used in pipeline automation control of corrosive media such as gas, liquid, steam, and oil. The two seat sealed electric three-way ball valve has a compact structure, beautiful appearance, and good sealing performance. Electric three-way ball valve can switch the flow direction of the medium in the pipeline. It can also connect or close two perpendicular channels. The four seat sealed three-way ball valve has a beautiful appearance, compact and reasonable structure. Electric three-way ball valves can not only switch the flow direction of the medium, but also connect the three channels to each other. Currently, any channel can be closed to connect the other two channels, flexibly controlling the merging or splitting of the medium in the pipeline.
| Nominal diameter DN (mm) | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Allowable pressure difference (MPa) | ≤ nominal pressure | |||||||||||
| Action range | 0~90° | |||||||||||
| Valve body form | Two stage split casting valve body | |||||||||||
| Valve cover form | monolithic | |||||||||||
| Cover type | Bolt compression type | |||||||||||
| Sealing packing | V-shaped PTFE packing, PTFE impregnated asbestos packing, asbestos textile packing, graphite packing | |||||||||||
| connection method | Flange type, threaded type (suitable for 1/2 "~2") | |||||||||||
| Valve core form | Three way ball valve core | |||||||||||
| flow characteristics | Approximate fast opening characteristic | |||||||||||
| Leakage quantity Q | Soft seal: zero leakage; Metal seal: According to GB/T4213-92, less than 0.01% of rated KV | |||||||||||
| basic error | ±1% | |||||||||||
| backlash | ±1% | |||||||||||
| dead zone | ≤1% | |||||||||||
| Configure actuator model | YH, YHQ, PSQ, 3410R electric actuators | |||||||||||
| Control method | Switch in position light (switch two position control), passive contact signal, 1/5K potentiometer, intelligent adjustment (4-20mA analog signal control) | |||||||||||
| power supply voltage | AC220/380V,50/60Hz |
|---|---|
| output torque | 50N·M~2000N·M |
| Action range | 0~90° 0~360° |
| Action Time | 15 seconds/30 seconds/60 seconds |
| protective device | overheat protection |
| ambient temperature | -30°~60° |
| manual operation | Comes with a handle for operation |
| limit stop | Electrical and mechanical dual limit |
| Protection level | Equivalent to IP-65 |
| Explosion-proof rating | ExdII BT4; Special requirements can be customized for ExdII BT6 |
| Position measurement | Optional switch or potentiometer |
| drive motor | 8W/E |
| Incoming interface | PE1/2 "incoming line lock |
| Part Name | Material Name | |||
|---|---|---|---|---|
| valve body | WCB | 304(CF8) | 316(CF8M) | 316L(CF3M) |
| sphere | 2Cr13+nitriding treatment | 304 | 316 | 316L |
| valve stem | 2Cr13 | 304 | 316 | 316L |
| sealing ring | Polytetrafluoroethylene (PTFE), reinforced polytetrafluoroethylene (PPL), para polystyrene, flexible graphite | |||
| Applicable Medium | Water, gas, steam, oil, etc | Corrosive media such as nitric acid | Acetic acid and other corrosive media | Corrosive media such as urea |
Electric three-way ball valves are divided into L-shaped and T-shaped, and the direction of medium flow is shown in the following figure. The L-type electric three-way ball valve is suitable for switching the flow direction of the medium, which can connect two perpendicular channels. The T-shaped electric three-way ball valve is suitable for dividing, merging or switching the flow direction of the medium. The T-shaped hole can connect three channels to each other or two of them. The electric three-way ball valve generally adopts a three seat structure, and can also adopt a four seat structure according to user requirements.
![]() |
![]() |
|---|---|
| Schematic diagram of flow direction for L-type electric three-way ball valve | Schematic diagram of flow direction for T-shaped electric three-way ball valve |
(1) Valve body parameters: nominal diameter, working pressure, process medium, usage scenario, valve body material, and other series of parameters.
(2) Actuator parameters: power supply voltage, control mode, control signal (4-20mA, 1-5V), action mode (electric open, electric closed)
Please provide the above technical parameters in as much detail as possible to facilitate our sales and technical personnel in accurately selecting for you. If you have any questions You can call us and we will do our best to provide you with high-quality service!