SC100 * 75 standard cylinder, customized and wholesale of non-standard cylinders

SC100 * 75 standard cylinder, customized and wholesale of non-standard cylinders

A cylindrical metal component that guides the piston to perform linear reciprocating motion inside the cylinder. Air in the engine cylinder converts thermal energy into mechanical energy through expansion; The gas is compressed by the piston in the compressor cylinder to increase the pressure.

The casing of turbines, rotary piston engines, etc. is often referred to as a "cylinder". The application fields of cylinders include printing (tension control), semiconductors (spot welding machines, chip grinding), automation control, robots, and so on.

Convert the pressure energy of compressed gas into mechanical energy in pneumatic transmission

SC100 * 75 standard cylinder, customized and wholesale of non-standard cylinders Cylinder type:

Capable pneumatic actuators. There are two types of cylinders: those that perform reciprocating linear motion and those that perform reciprocating oscillation (see figure). Cylinders that perform reciprocating linear motion can be divided into four types: single acting cylinders, double acting cylinders, diaphragm cylinders, and impact cylinders.

① Single acting cylinder: Only one end has a piston rod, and gas is supplied from one side of the piston to generate air pressure. The air pressure pushes the piston to generate thrust and extend, returning by spring or self weight.

② Double acting cylinder: alternate air supply from both sides of the piston, outputting force in one or two directions.

③ Diaphragm cylinder: Replace the piston with a diaphragm, output force in only one direction, and reset with a spring. It has good sealing performance, but short stroke.

④ Impact cylinder: This is a new type of component. It converts the pressure energy of compressed gas into the kinetic energy of high-speed piston movement (10-20 meters/second) to do work.

⑤ Rodless cylinder: a general term for cylinders without piston rods. There are two main types: magnetic cylinders and cable cylinders.

The cylinder that performs reciprocating oscillation is called an oscillating cylinder, which divides the inner cavity into two by blades and alternately supplies air to the two chambers. The output shaft performs oscillating motion with an oscillation angle less than 280 °. In addition, there are rotary cylinders, gas-liquid damping cylinders, and stepper cylinders.

Standard cylinders, customized and wholesale non-standard cylindersAdvantages:

1. The pneumatic device has a simple structure and easy installation and maintenance. The medium is air, which is less flammable than hydraulic media, so it is safe to use.

The working medium is either air or air itself. The exhaust treatment is simple, does not pollute the environment, and has low cost.

Adjusting the output force and working speed is very easy. The action speed of the cylinder is generally less than 1 m/S, compared to hydraulic and electrical operation methods.