SCP series sanitary centrifugal pump

Specification: 3T-180T, 0.55KW-75KW
Material: SUS304 SUS316L (in the selection of materials, all parts that come into contact with the material, such as the pump body, pump cover, impeller, etc., are made of SUS316L or SUSI304 stainless steel)
Standards: DIN, SMS
Impeller: Open impeller, leaving no hygiene dead corners
Working conditions: Sanitary centrifugal pumps are designed for horizontal conveying of high and low liquid levels, and are not self-priming. (Self priming pump is selected for self-priming type)
Surface treatment: Polish the liquid receiving part, and treat the rest with matte or sandblasting.
Maximum import pressure: 0.5MPa
Temperature range: -10 ° C to+140 ° C (EPDM)
Washable mechanical seal:
Water pressure: up to 0.1MPa
Water volume: 0.25-0.5L/min

2、 Sanitary centrifugal pump motor:
1．Stainless steel sanitary pumpAccording to the configuration, the three-phase AC motor mainly adopts the "ABB" brand, designed and manufactured in accordance with the International Electrotechnical Commission IEC60034 and IEC60072 standards, and meets the requirements of the European Community's "CE" marking.

2. Explosion proof motors can be selected to meet the needs of different occasions.
3. Excellent electrical performance, low noise, and low vibration. The standard design protection level of the motor is IP55, and the insulation level is F.
4. Working voltage:
≤3Kw，220-240V/380-420V， △/Y
＞3Kw，380-420V/660-690V, △/Y
5. Frequency: 50Hz/60Hz
6. Working mode: Continuous (SI)
7. Speed: The standard pump speed is 2900r/min

3、 Sanitary centrifugal pumpSelection instructions:
Flow rate: It is advisable to choose the middle section in the performance curve table.
Working temperature: -20-100 ℃ (maximum sterilization temperature 133 ℃).
Work environment and medium: Determine whether explosion-proof is required.
Working conditions: The sanitary pump is capable of conveying at various levels, including high and low liquid levels,
Non self-priming type. (Self priming pump is selected for self-priming type)
Pump body material: Choose 316L or 304 according to the medium requirements.
Sealing material: The standard rubber sealing ring is silicone rubber, according to the specifications
Choose fluororubber, EPDM, PTFE, and nitrile for quality.
4、 Unique design of sanitary centrifugal pump impeller:
The impeller and shaft sleeve are precision cast as a whole and directly installed on the output shaft of the motor, with high strength and rigidity. The design is unique, easy to install, and high precision ensures concentricity, solving vibration and improving pump strength. Even under harsh operating conditions, it always maintains alignment and low vibration; The seal has the longest lifespan.

Scope of application:

Medications: infusion, distilled water, high-purity water, traditional Chinese medicine liquid containing particles (3-6 mm), leachate. Cosmetics: dyes, alcohol, essence oil.
Beverages: alcohol, Baijiu, beer, malt juice, fermentation liquid, fruit juice drinks, drinks with granules.
Dairy products: whey, cream, milk, sugar solution
Others: candy industry, baking industry, chemical industry, etc.