SLP self-priming pump, return pump, sanitary pump

1、 Technical parameters of sanitary self-priming pump:
Application: Self priming pumps are mainly used to handle the transportation of some gas containing materials. Therefore, it is widely used in various situations where the liquid level is unstable and even lower than the pump inlet to extract materials, and is also used as a return in CIP systems.
Specifications: 10T-30T, 2.2KW-7.5KW.
Material: SUS316L (all parts in contact with the material, such as the pump body, pump cover, impeller, etc., are made of SUS316L stainless steel), and the liquid sealing material is EPDM (ethylene propylene diene monomer) rubber
Standards: DIN, SMS
Impeller: Open impeller, leaving no hygiene dead corners.
Shaft seal: The static ring of the mechanical seal is made of SUS316L steel embedded with graphite, while the dynamic ring is made of silicon carbide.
Surface treatment: Polish the liquid receiving part, and treat the rest with matte or sandblasting.
Maximum import pressure: 0.5MPa
Temperature range: -10 ° C to+140 ° C (EPDM)
Washable mechanical seal:
Water pressure: up to 0.1MPa
Water volume: 0.25-0.5L/min

2、 Sanitary self-priming pump motor：
1．Stainless steel sanitary pumpAccording to the configuration, the three-phase AC motor mainly adopts the "ABB" brand, designed and manufactured in accordance with the International Electrotechnical Commission IEC60034 and IEC60072 standards, and meets the requirements of the European Community's "CE" marking.

2. Explosion proof motors can be selected to meet the needs of different occasions.
3. Excellent electrical performance, low noise, and low vibration. The standard design protection level of the motor is IP55, and the insulation level is F.
4. Working voltage:
≤3Kw，220-240V/380-420V， △/Y
＞3Kw，380-420V/660-690V, △/Y
5. Frequency: 50Hz/60Hz
6. Working mode: Continuous (SI)
7. Speed: The standard pump speed is 1450r/min

Suitable for transporting pharmaceuticals: infusion, distilled water, high-purity water, traditional Chinese medicine liquids containing particles of 3-6 millimeters, leachate; Cosmetics: dyes, alcohol, essence oil; Dairy products: whey, cream, milk, sugar solution; Beverages: alcohol, Baijiu, beer, malt juice, fermentation liquid, fruit juice drinks, drinks with particles; Others: candy industry, baking industry, chemical industry, etc.