SQ615F Pneumatic Double T-shaped Three way Ball Valve

Nominal diameter DN (mm)

Allowable pressure difference (MPa)

≤ nominal pressure

Action range

Leakage quantity Q

The soft seal has zero leakage; Metal seal complies with ANSI B16.104 Class IV standard

basic error

Equipped with locator: less than ± 2% of the full stroke (adjustable type), switch type omitted

Equipped with locator: less than 2% of the full stroke (adjustable type), switch type omitted

NegotiableUpdate on 04/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

SQ615F pneumatic double T-shaped three-way ball valve, double pneumatic three-way ball valve, pneumatic double three-way ball valve, double pneumatic three-way threaded ball valve, pneumatic double three-way T-shaped threaded ball valve, pneumatic double control three-way ball valve, double control pneumatic three-way ball valve, pneumatic double three-way T-shaped ball valve, pneumatic double threaded three-way ball valve, one control two pneumatic three-way T-shaped threaded ball valve, pneumatic double three-way L-shaped ball valve, pneumatic double L-shaped three-way ball valve, one drag two pneumatic ball valve, pneumatic stainless steel double three-way ball valve with pneumatic piston double or single action (spring reset type) The actuator is composed of two three-way L-shaped or T-shaped stainless steel ball valves.

Product Details

_SQ615FPneumatic double T-shaped three-way ball valve

Product Overview

_SQ615FPneumatic double tee tee ball valve, pneumatic double tee ball valve, pneumatic double tee threaded ball valve, pneumatic double tee tee T-shaped threaded ball valve, pneumatic double control tee ball valve, pneumatic double control tee ball valve, pneumatic double tee T-shaped ball valve, pneumatic double threaded tee ball valve, one control two pneumatic tee T-shaped threaded ball valve, pneumatic double threaded tee L-shaped ball valve, pneumatic double threaded tee L-shaped ball valve, one drag two pneumatic ball valve, pneumatic stainless steel double threaded tee ball valveIt consists of a pneumatic piston type double acting or single acting (spring return type) actuator and two three-way L-shaped or T-shaped stainless steel ball valves. The double pneumatic three-way ball valve is divided into L-shaped and T-shaped, and the medium flow direction is shown in the following figure. The L-type pneumatic three-way ball valve is suitable for switching the flow direction of the medium, which can connect two perpendicular channels. The T-shaped pneumatic three-way ball valve is suitable for dividing, merging or switching the flow direction of the medium. The T-shaped hole can connect three channels to each other or two of them. Pneumatic three-way ball valves generally adopt a two seat structure, and can also adopt a four seat structure according to user requirements. The standard core has an L-shaped three-way dual channel design. By changing the relative angle between the core and the pipeline, different combinations of fluid control can be achieved for the three pipelines; The T-shaped pneumatic three-way internal thread ball valve can play a proportioning role and is suitable for adjusting and controlling the proportioning of liquid, gas, steam and other media. There is a proportional adjustment type (using an electric pneumatic valve positioner, powered by electrical signals and compressed air, receiving 0-10mA DC or 4-20mA DC current signals from the control system input, changing the rotation angle of the ball core to achieve proportional adjustment action). Two position switching type (using electromagnetic directional valve and valve position feedback device, powered by AC220V or DC24V power supply voltage and compressed air, to achieve rapid switching control of fluid medium).

Valve control mode:

Pneumatic three-way ball valves are divided into L-shaped and T-shaped, and the direction of medium flow is shown in the following figure. L-type pneumatic three-way ball valve is suitable for switching the flow direction of the medium, which can connect two perpendicular channels. T-shaped pneumatic three-way ball valve is suitable for dividing, merging or switching the flow direction of the medium. T-shaped hole can connect three channels to each other or two of them. Pneumatic three-way internal thread ball valve generally adopts a two seat structure, and can also adopt a four seat structure according to user requirements.

Flow diagram of pneumatic three-way internal thread ball valve:

Technical parameters and performance:

Technical parameters of GTD/ATD pneumatic actuator		Qs614/5F Pneumatic Three way Ball Valve Body Parameters
Type	Double acting piston type, spring reset type	Nominal Diameter	DN15～100mm
air supply pressure	Double acting: 2-8bar/Single acting: 4-8 bar	Nominal Pressure	PN1.6、2.5、4.0、6.4MPa
output torque	Double acting: 4N · M~10560N · M	Valve shaft material	stainless steel
output torque	Single action: 7N · M~2668N · M	Valve body material	304/316/316L stainless steel
Operating Temperature	Room temperature type: -20 ℃~80 ℃ (Ding Jing rubber O-ring)	Spherical material	304/316/316L stainless steel
Operating Temperature	High temperature type: -20 ℃~160 ℃ (fluororubber O-ring)	valve seat seal	PTFE、PPL、 metal seal
Action range	0～90°±5°	Temperature	PTFE ≤ 150 ℃, PPL ≤ 300 ℃, metal seal ≤ 425 ℃
threaded interface	GTD40-GTD83 G1/8″	Applicable Medium	Water, petroleum, acidic and alkaline substances, viscous fluids, slurries, strong oxidizing media, etc
threaded interface	GTD110～GTD350/ATD52～270 G1/4″	Applicable Medium
Valve position signal	Positioner: 4-20mA/responder: fully open and fully closed signal	Characteristics	Simple connection, flow direction switching, low resistance, stable action

Main technical parameters:

valve body

Valve body form	Three way cast ball valve
Nominal Diameter	DN15～100mm
Nominal Pressure	PN1.6、2.5、4.0、6.4 MPa
connection type	Threaded type (suitable for 1/2 'to 2')
Cover type	Nut tightening type
sealing packing	V-shaped polytetrafluoroethylene packing, PPL high-temperature sealing material

Valve components:

Valve core form	O-shaped ball valve core
flow characteristics	Quick opening feature

Executing Agency:

Model of actuator	GT, SR, ST, AT series single (double) acting pneumatic actuators
gas supply pressure	0.4～0.7MPa
air connection	G1/4'、G1/8'、G3/8'、G1/2'
ambient temperature	-20～+90℃
mode of action	Single acting actuator: gas closed type (B) - valve position open when gas is lost (FO); Pneumatic opening (K) - valve position closed when gas is lost (FC) Double acting actuator: gas closed type (B) - valve position maintenance during gas loss (FL); Pneumatic opening (K) - valve position maintenance during gas loss (FL)
Can be equipped with accessories	Positioner, solenoid valve, air filter pressure reducer, holding valve, travel switch, valve position transmitter, handwheel mechanism, etc

Main performance indicators:

Main component materials:

1	Main valve body	Cast steel, stainless steel
2	connection end	Cast steel, stainless steel
3	valve seat	PTFE、PPL
4	sphere	2Cr13+hardening treatment, 304, 316
5	valve stem	stainless steel
6	support	25
7	coupling	25
8	actuator	Cast aluminum (depending on different actuators)

Main appearance and connection dimensions:

Nominal Diameter	15	20	25	32	40	50
L	68	78	86	111	126	143
L1	34	39	43	55.5	63	71.5
H	19	25	37	45	70	80
H1	130	135	139	158	165	202
H2、H3	Based on the actual configuration of pneumatic accessories, it depends on the foundation
D	140	140	140	164	164	190
D1	62	62	62	75	75	91

Note: The above product introduction, parameters, images, and data are for reference only

【Pneumatic double three-way ball valve, double pneumatic three-way threaded ball valve, pneumatic double three-way T-shaped threaded ball valve, pneumatic double control three-way ball valve, double control pneumatic three-way ball valve, pneumatic double three-way T-shaped ball valve, one control two pneumatic three-way T-shaped threaded ball valve, pneumatic double three-way L-shaped ball valve, pneumatic double three-way L-shaped ball valve, one drag two pneumatic ball valve, pneumatic stainless steel double three-way ball valve】This product is produced by【Henan Nasway Valve Co., Ltd】production.Respected by the companyThe corporate spirit of "steadfastness, hard work, and responsibility", and with“Integrity wins the world "To establish a business philosophy, create a good office environment, and rely on a new management model, advanced technology, thoughtful service, and integrity as the foundation of our survival, we always adhere to the principle of putting customers first and serving them wholeheartedly. We insist on using our own services to impress customers. Welcome new and old users to visit and guide our work. If you are interested in the product or have any questions, you can leave us a message or contact us directly. We will contact you immediately after receiving your message. Looking forward to working together with you to create brilliance! Your satisfaction is our eternal pursuit!