SXLD-DN125F DN125 electromagnetic flowmeter

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SXLD-DN125F DN125 electromagnetic flowmeter is equipped with a pair of detection electrodes on the tube wall where the axis of the measuring tube and the magnetic field lines are perpendicular to each other. When the conductive liquid moves vertically along the measuring tube in an alternating magnetic field, the conductive liquid cuts the magnetic field lines and generates an induced potential, which is detected by the two detection electrodes on the measuring tube.

Product Details

SXLD-DN125F DN125 electromagnetic flowmeterfeature

The measurement accuracy is not affected by changes in fluid density, viscosity, temperature, pressure, and conductivity. The sensor's induced voltage signal is linearly related to the average flow rate, resulting in high measurement accuracy.

There is no obstruction in the measuring pipeline, so there is no additional pressure loss; There are no movable parts inside the measuring pipeline, so the sensor has an extremely long lifespan.

Due to the fact that the induced voltage signal is formed in the entire space filled with a magnetic field and is the average value on the surface of the pipeline, the sensor requires a shorter straight pipe section, with a length of 5 times the diameter of the pipeline.

The sensor part only has the inner lining and electrodes in contact with the measured liquid. As long as the electrode and inner lining materials are selected reasonably, they can be corrosion-resistant and wear-resistant.

SXLD-DN125F DN125 electromagnetic flowmeterTechnical Specifications

execution standard	JB／T 9248—1999
Nominal Diameter	15. 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600, 700, 800, 900, 1000, 1200, 1400, 1600, 1800, 2000, 2200, 2400, 2600, 2800, 3000
Zui high flow rate	15m／s
accuracy	DNl5～DN600	Indication: ± 0.35% (flow rate ≥ 1m/s); ± 3mm/s (flow rate<0.99m/s)
	DN700—DN3000	± 0.53% of the indicated value (flow rate ≥ 0.83m/S); ± 4mm/s (flow rate<0.83m/S)
Fluid conductivity	≥5uS／cm
Nominal Pressure	4.0MPa	1.6MPa	1.0MPa	0.6MPa	6.3、10MPa
	DNl5～DN150	DNl5～DN600	DN200～DN1000	DN700～DN3000	Special Orders
ambient temperature	sensor	-25 ℃ -+60 ℃
	Converter and integrated model	-10 ℃ -+60 ℃
Lining material	Polytetrafluoroethylene, chloroprene rubber, polyurethane, perfluoroalkoxy (F46), mesh PFA
Zui high fluid temperature	- Body type	70℃
	Separated type	Polychloroprene rubber lining	80℃； 120 ℃ (specify when ordering)
		Polyurethane lining	80℃
		PTFE lining	100℃； 150 ℃ (specify when ordering)
		Perfluoroethylene propylene (F46)
		Mesh PFA
Signal electrode and ground electrode materials	Stainless steel 0Crl38Nil2M02Ti, Hastelloy C, Hastelloy B, titanium, tantalum, platinum/iridium alloy, stainless steel coated with tungsten carbide
Electrode mechanism	DN300—DN3000
Connecting flange material	carbon steel
Grounding flange material	Stainless steel 1Cr18Ni9Ti
Imported protective flange materials	DN65—DNl50		Stainless steel 1Cr18Ni9Ti
	DN200～DNl600		Carbon steel and stainless steel 1Cr18Ni9Ti
shell protection	DNl5~DN3000 separable rubber or polyurethane lined sensor			IP65 or IP68
	Other sensors, body type flow meters, and separate converters			IP65
Distance (separated type)	The distance between the converter and the sensor is generally not more than 100m