Seismic resistant electric contact pressure gauge YTNXC-100 aviation plug cable connector

NegotiableUpdate on 01/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The shock resistant electric contact pressure gauge YTNXC-100 aviation plug cable joint is used to measure the positive and negative pressures of gas and liquid media that do not corrode copper and copper alloys. When the pressure reaches a predetermined value, a signal is sent to connect the control circuit and achieve the purpose of automatic control alarm.

Product Details

Seismic resistant electric contact pressure gauge YTNXC-100 aviation plug cable connectorIt consists of a measurement system, an indicator device, a magneto electric contact device, a housing, an adjustment device, and a junction box (plug socket). The working principle of the instrument is based on the spring tube in the measurement system, which is forced to produce corresponding elastic deformation displacement at the end of the spring tube under the pressure of the measured medium. With the help of the connecting rod and the transmission of the gear transmission mechanism, it is amplified and the measured value is gradually indicated on the dial by the indicator pointer (together with the contact) fixed on the gear shaft. At the same time, when it comes into contact with the contact point (upper or lower limit) on the set pointer (dynamic breaking or dynamic closing), it causes the circuit in the control system to be disconnected or connected, in order to achieve automatic control and send alarm signals.

Seismic resistant electric contact pressure gauge YTNXC-100 aviation plug cable connectorModel designation

Y	X	C	Specifications						content
Instrument category ： pressure gauge	Control method ： Slow moving contact position switch	Contact form of contact device : Magnetic assisted action type	A						Suitable for ammonia and its mixtures
			G						Equipped with isolation device
				-
					ceremony table public call, name, say, weigh straight path and type formula				100 and 150 respectively represent radial formulas with diameters of 100 and 150mm
									102 represents a diameter of 100mm towards the rear edge
									103 and 153 respectively represent axial embedded types with diameters of 100 and 150mm
						B
							-
								Other functions	F - Corrosion resistance; Z-anti vibration; FZ Corrosion and Vibration Resistance

Y	X	C	□	-	□	B	-	□

Main technical indicators and functions

Scale range, accuracy level, and joint thread size

type	model	name	Scale range MPa	Accuracy class			threaded joint size
				instruction	set value
					connect	disconnect
普通型	YXC-100 *YXC-102 YXC-103	Magnetic assisted electric contact pressure gauge	0-0.6 to 60 and -0.1-0.06 to 2.4 series	1.5	1.5	4	M20×1.5 (G3/8) (G1/2')
	YXC-150 *YXC-153		0-0.1 to 60 and -0.1-0 to 2.4 series
type	YXCA-150	Magnetic assisted electric contact ammonia pressure gauge	0-0.16 to 60 and -0.1-0.06 to 2.4 series	2.5	2.5	4
Anti vibration mode	YXC-100-Z *YXC-102-Z YXC-103-Z	Magnetic assisted electric contact pressure gauge	0~0.6 to 60 and -0.1~0.5 to 2.4 series	1.5	1.5	5
Corrosion resistant type	YXC-100B-F YXC-102B-F YXC-103B-F YXC-150B-F *YXC-152B-F		0~0.16 to 60 and -0.1~0.06 to 2.4 series	1.5	1.5	4
Corrosion resistant and vibration resistant type	YXC-100B-FZ YXC-102B-FZ YXC-152B-FZ YXC-153B-FZ		0~0.6 to 60 and -0.1~0.5 to 2.4 series	1.5	1.5	5

Note: 1) Models marked with "*" are temporarily limited to special orders

2) The isolated soft tail length is 1, 2, 3, and 4m (with 2m being the preferred length)

Electrical parameters and control forms of contact devices

Contact power	Zui High Operating Voltage	Maximum working current	Control form
30VA (resistive load)	220V D.C or 380V A.C	1A	Upper and lower limits, dual upper limits, dual lower limits

Note: When the current is 1A, the operating voltage should be lower than 40V.

Environmental conditions for use

type	Working temperature range		relative humidity	Anti working vibration performance
	medium	surrounding environment
普通型、型	-40~70℃		not more than 85%	V. Level H.3
Corrosion resistant type	-25~55℃		Not exceeding 90%	V. Level H.3
Anti vibration type, corrosion-resistant and anti vibration type				V. H.4 level
Isolation type ordinary type	Below 150 ℃	-40~70℃		V. Level H.3
Isolated corrosion-resistant type	-40~70℃
Isolation type other types	Below 150 ℃	-25~55℃		V. H.4 level

Temperature effect: The displayed value should not exceed 0.4%/10 ℃, and the set point should not exceed 0.6%/10 ℃ (with a deviation of 20 ± 5 ℃ from the operating temperature)