Silicone adhesive UV irradiation test chamber

NegotiableUpdate on 03/31

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The silicone adhesive UV irradiation test chamber has working state memory, PLC programmable touch operation system, and automatic water filling function. When power is restored after an external power outage during the irradiation process, the irradiation test will automatically start and continue.

Product Details

　　Silicone adhesive UV irradiation test chamberProduct Description:

The instrument has working state memory, PLC programmable touch operating system, and automatic water filling function. When power is restored after an external power outage during the irradiation process, the irradiation test will automatically start and continue.

Product standard for UV irradiation test chamber:

GB/T11944-2002, GB/T7020-2002 Technical Requirements for Insulated Glass

GB16776-2005 Silicone structural sealant for buildings

GB/T14683-2003 Silicone building sealant

GB/T13477-2002 Test methods for building sealing materials

JC/T485-1992 Elastic sealant for building windows

JC/T 486-1992 Elastic sealant for insulating glass

JC/T882-2001 Sealing glue for curtain wall glass joints

JC/T883-2001 Building sealant for stone materials

JC/T884-2001 Building sealant for color coated steel plates

Scope of application of UV irradiation test chamber: modern laboratory equipment.

The main technical parameters of the ultraviolet irradiation test chamber are:

1. High pressure mercury lamp power: 300W

2. Temperature measurement range: 0-65 ℃

3. Temperature control accuracy: ± 0.5 ℃

4. Radiation time setting: 9999H

5. Heater power: 600W

6. Water level control accuracy: set value ± 1mm

7. Service life of water level probe: greater than 5000 hours

8. Dimensions of the test chamber: 550 × 520 × 680mm

9. Control instrument dimensions: 400 × 440 × 140mm

10. Sample disk size: 450 × 450mm

11. Power supply: 220VAC ± 10% 1kVA

12. Shell: All stainless steel

The SZW water UV irradiation test chamber instrument is equipped with a PLC programmable touch system and an integrated temperature sensor. It can achieve automatic lighting of high-pressure mercury lamps, irradiation timing control, and constant temperature control inside the test chamber. If there is a power outage during the experiment, when the power supply is restored, the irradiation test will automatically start and continue, with sequential accumulation timing.Silicone adhesive UV irradiation test chamber