Welcome Customer !

Membership

Help

Shanghai Kaiyuan Automation Technology Co., Ltd
Custom manufacturer

Main Products:

cep-online>Products

Shanghai Kaiyuan Automation Technology Co., Ltd

  • E-mail

    3007052287@qq.com

  • Phone

    13482468385

  • Address

    Building 1, No. 188 Xinghuo Road, Qingcun Town, Fengxian District, Shanghai

Contact Now

Solid state relay module PLC-OSC -24DC/24DC/5/ACT

NegotiableUpdate on 03/04
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
Solid state relay module PLC-OSC -24DC/24DC/5/ACT $r $nPLC-OSC-24DC/24DC/5/ACT - Solid state relay module $r $n2982786 $r $nPLC-INTERFACE is suitable for output function, including PLC-BSC.../ACT base terminals, connected by screws, with plug-in micro solid state relays, for installation on DIN rail NS 35/7.5, 1 normally open contact, input: 24 V DC, output: 3 .. 33 V DC/5 A
Product Details

Solid state relay module PLC-OSC -24DC/24DC/5/ACT
PLC-OSC- 24DC/ 24DC/ 5/ACT
-Solid state relay module
2982786

PLC-INTERFACE is suitable for output functions, including PLC-BSC.../ACT base terminals, connected by screws, with plug-in micro solid state relays for installation on DIN rail NS 35/7.5, 1 normally open contact, input: 24 V DC, output: 3 .. 33 V DC/5 A

固态继电器模块PLC-OSC- 24DC/ 24DC/ 5/ACT固态继电器模块PLC-OSC- 24DC/ 24DC/ 5/ACT固态继电器模块PLC-OSC- 24DC/ 24DC/ 5/ACT

Solid state relay module PLC-OSC -24DC/24DC/5/ACT
Product Details




Product Type Solid state relay module
Product Series PLC-INTERFACE
application Output function
Operation Mode Work factor
Insulation characteristics
insulation Basic isolation
Insulation characteristics: standards/regulations
insulation Basic isolation
Overvoltage category III
pollution level 2

Power consumption under rated conditions 0.22 W
Test voltage (input/output) 2.5 kV (50 Hz, 1 minute, input/output)

Rated input voltage UN 24 V DC
Nominal voltage_GRP (plugged-in solid-state relay) 24 V DC
Compared to UNThe input voltage range 0.8 . .. 1.2
Input voltage range 19.2 V DC . .. 28.8 V DC
Switch threshold '0' signal, voltage < 10.7 V
Switch threshold '1' signal voltage > 16.7 V
UNTypical input current below 9 mA
Typical response time 20 µs
Typical closing time 400 µs
Working voltage display Yellow LED
protection circuit Polarity protection; Polarity protection diode
Backup diode; freewheeling diode
transmission frequency 300 Hz

Contact type 1 N/O contact
Digital output design electronic
Rated output voltage 24 V DC
Output voltage range 3 V DC . .. 33 V DC
Limit continuous current 5 A (see temperature load curve)
starting current 15 A (10 ms)
overvoltage protection > 33 V DC
Limit voltage drop under continuous current ≤ 200 mV
output circuit 2-wire connection, floating ground
protection circuit Polarity protection; Polarity protection diode
surge protection

connection method Screw connection
Stripping length 8 mm
thread M3
Rigid wire cross-section 0.14 mm² . .. 2.5 mm²
Cross section of flexible wire 0.14 mm² . .. 2.5 mm²
0.2 mm ²... 2.5 mm ² (single casing)
2x 0.5 mm ²... 1.5 mm ² (TWIN casing)
Connectable guide cross-section AWG 26 . .. 14
tightening torque 0.6 Nm . .. 0.8 Nm

width 14 mm
height 80 mm
depth 94 mm

color Grey (RAL 7042)
Flame retardant rating, compliant with UL 94 V0 (shell)

environmental conditions
Environmental temperature (operating) -20 °C . .. 60 °C
Environmental temperature (storage/transportation) -25 °C . .. 70 °C


Low voltage command Compliant with low voltage directive
Electromagnetic Compatibility Compliant with EMC regulations

Standards/Regulations
Standards/regulations IEC 60947-5-1

Installation Type DIN rail installation
Assembly Instructions Seamless arrangement
Installation location Refer to attenuation curve

Order Number 2982786
packaging unit 10 pc
Minimum order quantity 10 pc
Sales key code CK6233
Product key code CK6233
Catalog page Page 378 (C-5-2019)
GTIN 4046356342841
Individual weight (including packaging) 71.75 g
Individual weight (excluding packaging) 67.818 g
Tariff number 8536411090
place of origin DE