Stainless steel mechanical grille cleaning machine

Stainless steel mechanical grille cleaning machineStructure:

(1) Tensioning device: A set of tensioning devices should be installed on both sides of the equipment outside the rack. The tensioning device should be spiral type to adjust the tension of the transmission chain when it is too loose.

(2) Guiding device: The guiding device of the stainless steel grid cleaner consists of four sets of guiding wheels, which are installed on the upper and lower parts of both sides of the frame. Its main function is to change the direction of operation of the separator rake.

(3) Traction chain: The traction chain is a plate roller chain, assembled from stainless steel chain plates and stainless steel roller chains. The traction chain is closed and requires an anti slip device to prevent debris from getting stuck.

(4) Slag unloading device: The stainless steel grid cleaner needs to be equipped with an effective slag unloading device, so that the grid slag can be smoothly, cleanly, and accurately unloaded from the rake to the spiral conveying equipment; The rake toothed grille slag removal mechanism operates flexibly and can scrape slag every time it moves back and forth.

Mechanical grid cleaning machines are widely used in secondary grids for water supply and drainage, as well as water intake structures without large floating objects; It can also be used in industrial wastewater such as papermaking, textiles, leather, brewing, sugar extraction, aquaculture, and municipal sewage.

It consists of multiple toothed rakes (usually 4-8 pieces) evenly distributed on the traction ring chain at certain intervals, forming a multi rake rotating body. The toothed rakes descend from behind the trash rack and run backwards to the front of the rack through underwater chain wheels, raking out the dirt intercepted by the rack from bottom to top. They are then pulled along the baffle to the slag discharge port and discharged into the waste storage tank or through auxiliary equipment such as conveyors and presses.

Stainless steel mechanical grille cleaning machineThe installation and application of mechanical grilles can achieve practical results of continuous operation, so compared with general wastewater treatment equipment, it can save a lot of time and cost, which is very beneficial for manufacturers to apply industrial equipment. In addition, the construction of this machine equipment is relatively simple, which not only saves maintenance costs but also improves the convenience of the machine equipment. In order to make the entire process of industrial equipment more convenient and efficient, employees must master the basic principles of machine equipment application, so that wastewater treatment can be carried out more efficiently according to the machine equipment.
During the entire operation of the mechanical grid, the machine equipment will first release the rope. At this point, the scraper will reach a certain aspect ratio and then move downwards in a certain direction, making it very easy to achieve the actual effect of skimming. The skimming plate will gradually decrease under the harm of the applied force, and return to its original position after the actual skimming operation. Therefore, the manufacturing principle of industrial equipment is relatively simple, which can operate more smoothly and efficiently throughout the entire process, save operating procedures, and better meet the application requirements of the field.