Straight stroke pneumatic actuator

NegotiableUpdate on 01/29

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The bottom dimensions of the straight stroke pneumatic actuator comply with IOS5211/DIN3337 and are connected to the valve. It can be divided into two types according to switch requirements: double acting and single acting. Among them, the single use is spring recovery type, which is divided into two types: normally open and normally closed. All components of the actuator are made of carbon steel. The inner surface of the cylinder and the surface of the shaft have been chrome plated. The outer surface of the actuator is coated with Jordan anti-corrosion paint. Products can be customized according to the technical parameters of the valve, such as flange, stroke, etc

Product Details

The ZH series valve pneumatic actuator uses 0.4-0.8MPa (gauge pressure) purified compressed air as the working power, pushes the piston, and drives the valve gate (wedge gate valve, flat gate valve, knife gate valve, globe valve, etc.) to make linear motion perpendicular to the fluid, thereby achieving the purpose of regulating, opening and closing the valve.

Basic Design	Single piston, dual piston, and multi piston actuators Single acting and double acting actuators
itinerary	25~1200mm
air supply pressure	0.3~0.8MPa（1.0MPa）
ambient temperature	Standard Type (Standard): -29 °~+90 ° Low temperature type (optional):<-29 ° C High temperature type (optional):>+90 °
Optional accessories	Dual/single control solenoid valve, feedback device, locator, pressure reducing valve, filter, oil mist device, etc