Super large flow gear pump

purpose
Suitable for conveying lubricating oil or other liquids with properties similar to lubricating oil that do not contain solid particles and fibers, are non corrosive, have a temperature not exceeding 80 ℃, and a viscosity of 5 × 10-6~1.5 × 10-3m2/s (5-1500cSt).

Scope of application
Can be used as a transmission and booster pump in oil transportation systems;
A fuel pump that can be used for delivery, pressurization, and injection in the fuel system;
It can be used as a lubricating oil pump in all industrial fields.

structural characteristics
This series of gear pumps mainly consists of gears, shafts, pump bodies, safety valves, and shaft end seals. Gears have high hardness and strength after heat treatment, and are installed together with the shaft in a replaceable shaft sleeve for operation. The lubrication of all parts inside the pump is automatically achieved through the use of the output medium during pump operation.
There are well-designed oil discharge and return grooves inside the pump, which minimize the torque force that the gears bear during operation, resulting in low bearing load, minimal wear, and high pump efficiency.
The pump is equipped with a safety valve as overload protection, and the full reflux pressure of the safety valve is 1.5 times the rated discharge pressure of the pump. It can also be adjusted according to actual needs within the allowable discharge pressure range. However, please note that this safety valve cannot be used for long-term operation as a pressure reducing valve. If necessary, it can be installed separately on the pipeline.
When viewed from the extended end of the main shaft towards the pump, it rotates clockwise.


Performance parameters of KCB series high flow gear pump

KCB1200-9600 pump appearance and installation dimensions

KCB-1200~KCB-9600 Appearance and Installation Dimensions