TB transparent medium pressure fan-TB-150 medium pressure blower

TB transparent medium pressure fan-TB-150 medium pressure blowerGenerally used for general air supply in printing machinery, burners, plastic extruders, bag blowers, laminating machines, fruit making machinery, extruders, hot air generators, powder conveying, kitchen machinery, woodworking machinery, dryers, incinerators, incubators, etc.The impeller of a turbofan (also known as a turbofan centrifugal fan) is covered with a mechanical casing, and the center of the impeller is the air inlet. When the medium pressure fan is working, the power equipment drives the impeller to rotate, drawing air in from the air inlet.
During the working process, although the rotation of the impeller increases the pressure and velocity of the gas, the various changes in the gas are relatively small. Therefore, in the design and use of centrifugal fans, gas is usually treated as an incompressible fluid. The gas treatment process of medium pressure fans is completed in the same radial plane, so medium pressure fans are also called radial centrifugal fans.

Among the performance parameters of medium pressure fans, the most important ones are gas flow rate, pressure, conveying power, efficiency, and impeller speed, which must be paid attention to during the selection process. The gas flow parameters of a medium pressure fan represent the volume of gas that the fan can process per unit time, while the pressure of a medium pressure fan refers to the internal gas pressure value during its operation. The efficiency of a medium pressure fan refers to the ratio between the shaft power of the fan and the actual effective power of the processed gas. The total pressure efficiency of centrifugal fans is about 90%, and in the future development of centrifugal fans, efficiency value will be one of the goals further pursued by researchers.

TB transparent medium pressure fan-TB-150 medium pressure blowerFeatures:
1、 High pressure, high air volume, low noise, lightweight
2、 Using aluminum alloy material, significantly reducing weight and achieving the goal of lightweighting.
3、 The motor is designed for I.E.C (1HP or above), with a fully enclosed external fan aluminum frame motor and a special axis design, suitable for long-term use.
4、 Special blade design, high pressure, large air volume, low noise, long lifespan.
5、 Special air volume control damper, with high stability in air volume control and easy operation (suitable for CX, TB, HTB).

Installation precautions:
1. The connection between the fan and the air duct is made of non flammable flexible material hose, with a length of not less than 20 centimeters. The diameter of the hose is the same as that of the fan and air duct, and the connection is moderately tight;
2. Some mesh materials, such as steel wire mesh or sturdy plastic mesh, need to be installed at the position of the fan outlet to prevent insects from entering;
The problem with the fan outlet can only be that the pipeline is getting larger and not smaller.
Precautions during use and selection process:
1. The use involves the issue of selection. Before making a purchase, it is necessary to have a brief understanding of the manufacturer's situation. For this type of machinery, it is necessary to choose products from reputable manufacturers;
2. It is also necessary to have a certain understanding of whether the background of the supplier is legal, which involves solutions in case of security issues during normal use in the later stage;
3. When using, be sure to pay attention to the wind direction, which means that the fan enters from that side and exits from that side. Do not operate it randomly;
4. The model of the fan used should be selected according to the actual situation, and should not be too large or too small.