TUK Ultrasonic Porking Quality Tester

TUK Ultrasonic Porking Quality Tester
TUK Ultrasonic Porking Quality Tester Intelligent Ultrasonic Porking Quality Tester is a device that detects pore quality based on ultrasonic principles. The system consists of a host, ultrasonic transmission and reception probes, depth counters, wire racks, cables, etc. The probes are uniformly tested according to the set distance of the measuring points during the lowering process. Each testing point automatically tests two cross-sectional views in the shape of a "+" at the same time. The four groups of transmitters and receivers on the probes automatically emit ultrasonic signals and receive signals emitted through the hole wall. The arrival time of the reflected signals reflects the size of the aperture, and the signal intensity reflects the characteristics of the hole wall. Simultaneously test the orientation of the profile. The diameter, verticality, and inclination direction of the borehole can be calculated.
Application scope of TUK ultrasonic pore quality tester
1. Quality inspection equipment for drilling piles in railways, highways, ports, high-rise buildings, etc;
2. Quality inspection of borehole formation (diameter, depth, expansion, contraction, inclination, verticality) and groove formation of support piles;
3. Quality inspection of all underground continuous wall construction;
Characteristics of TUK Ultrasonic Porking Quality Inspection System
Probe design *, 4 sets vertically arranged, built-in electronic compass, good waterproof performance;
The probe automatically realizes the testing of the "+" two profile and generates two profile images simultaneously;
The dual pulley design of the depth counter effectively prevents cable slippage and ensures accurate depth measurement;
The real-time testing system is fully intelligent, requiring only the lifting and lowering of the probe to automatically complete testing according to the density requirements of the measuring points;
The output system has rich content and powerful functions;
Automatically generate test result reports;
Replay of the actual testing process;
Automatically read the position of the hole wall and calculate the aperture value, offset value, and perpendicularity of each measuring point.
Strong signal penetration, suitable for mud density of 1.5g/cm3 (with small sand bubbles); 4% higher sediment content;
Report output format: Ecxel can be directly printed on site, with recovery chart, waveform chart, numerical table and other modes;
The instrument testing software is powerful and intelligent, with one click operation to complete testing tasks;
Fully automated detection, realizing functions such as fully automatic lifting, cable cleaning, and fully automatic wiring arrangement;
The probe has the functions of self stopping from bottom to top, automatic deceleration from top to top, and self stopping;
Load bearing wire type: 4mm leather steel wire rope, capable of bearing up to 200kg, with the advantage of no burrs;
The entire system operates on 12V DC power, ensuring safer and more reliable operation;
It has the function of real-time monitoring of probe direction and posture, and can test the specific direction of each test profile, as well as the drilling inclination and aperture of the probe contact wall section;
Adopting high-power ultrasound technology, adaptable to a wide range of mud densities, with a large testing distance and no blind spots, and data display methods such as waveform, grayscale, and color chromatography;
Working mode: It has both manual and automatic functions.
System Features
Probe design *, 4 sets vertically arranged, built-in electronic compass, good waterproof performance;
The probe automatically realizes the testing of the "+" two profile and generates two profile images simultaneously;
The dual pulley design of the depth counter effectively prevents cable slippage and ensures accurate depth measurement;
The real-time testing system is fully intelligent, requiring only the lifting and lowering of the probe to automatically complete testing according to the density requirements of the measuring points;
The output system has rich content and powerful functions;
Automatically generate test result reports;
Replay of the actual testing process;
Automatically read the position of the hole wall and calculate the aperture value, offset value, and perpendicularity of each measuring point.
Strong signal penetration, suitable for mud density of 1.5g/cm3 (with small sand bubbles); 4% higher sediment content;
Report output format: Ecxel can be directly printed on site, with recovery chart, waveform chart, numerical table and other modes;
The instrument testing software is powerful and intelligent, with one click operation to complete testing tasks;
Fully automated detection, realizing functions such as fully automatic lifting, cable cleaning, and fully automatic wiring arrangement;
The probe has the functions of self stopping from bottom to top, automatic deceleration from top to top, and self stopping;
Load bearing wire type: 4mm leather steel wire rope, capable of bearing up to 200kg, with the advantage of no burrs;
The entire system operates on 12V DC power, ensuring safer and more reliable operation;
It has the function of real-time monitoring of probe direction and posture, and can test the specific direction of each test profile, as well as the drilling inclination and aperture of the probe contact wall section;
Adopting high-power ultrasound technology, adaptable to a wide range of mud densities, with a large testing distance and no blind spots, and data display methods such as waveform, grayscale, and color chromatography;
Working mode: It has both manual and automatic functions.