Tin foil peeling strength testing machine Ceramic substrate peeling strength testing machine

Peel tensile machineTin foil peeling strength testing machine Ceramic substrate peeling strength testing machinePeel strength testing machine

The peel strength tester is a specialized testing instrument for controlling the production process of tape, copper-clad laminates, and printed circuit boards, used to test the adhesion between tape, copper foil, and substrate.

Peel tensile machineTin foil peeling strength testing machine Ceramic substrate peeling strength testing machinePeel strength testing machineEvaluate the adhesive strength between the conductive copper layer and the ceramic substrate in a metal backed printed circuit board by applying a vertical upward force. The 90 degree peel strength tester for silicon nitride substrates is used to test the adhesion between copper foils, copper sheets, and ceramics on ceramic coated copper substrates of different material qualities at the same temperature environment.

Peel tensile machineTin foil peeling strength testing machine Ceramic substrate peeling strength testing machinePeel strength testing machineUsed to measure the peel resistance, peel strength, average peel strength, and average peel strength of copper foil on rigid boards or flexible boards in the laboratory for testing copper-clad laminates and printed circuit board industries. The copper foil peel strength testing machine is a machine that uses a sufficiently sized copper foil medium laminated board to cut three samples, with a width of 50mm, a length of 250mm, and a thickness of 2mm. It is mainly used in DCB copper-clad ceramic carrier board, AMB copper-clad ceramic carrier board, DPC copper-clad ceramic carrier board ceramic substrate, PCBS board, copper-clad substrate, circuit board, tin foil, aluminum foil, as well as various pressure-sensitive tapes, acetate cloth tapes, stickers, 3M adhesives, films, etc. that are attached to the surface of objects. The computerized 90 degree peel strength testing machine is controlled and displayed by a computer to vertically peel off products at 90 degrees. The ceramic coated aluminum substrate vertical peeling test machine meets the requirements of IPC-TM-650, GB/T4677, GB/T13557 and other standards.

Peel tensile machineTin foil peeling strength testing machine Ceramic substrate peeling strength testing machinePeel strength testing machineMain technical parameters:

1. Specification: XJBL

2. Accuracy level: Level 0.5

3. Load: 200N

4. Effective force measurement range: 0.1/100-99.9999%;

5. Test force resolution, with a load of 500000 yards; There is no distinction between internal and external, and the resolution remains unchanged throughout the entire process.

6. Effective test width: 50mm

7. Effective experimental space: 250mm

8. Test speed: 0.001~300mm/min (adjustable arbitrarily)

9. Speed accuracy: within ± 0.5% of the displayed value;

10. Displacement measurement accuracy: within ± 0.5% of the displayed value; 11. Deformation measurement accuracy: within ± 0.5% of the displayed value; 12. Test bench lifting device:

Fast/slow speed control, can be inched;

13. Test bench safety installation: electronic limit protection

14. Test bench return: Manual can return to the initial position of the test at high speed, and automatic can return automatically after the test is completed;

15. Load protection: Automatic protection when overloaded by 10%;

16. Motor: 200W

17. Host weight approximately: 40kg