Transformer oil treatment

ZJA Transformer Oil Double Vacuum Oil Filter

Transformer oil treatmentScope of application:ZJA Transformer Oil Double Vacuum Oil FilterThis product has the process and technology of our company, and is widely used in various industries such as power plants, power stations, power companies, metallurgy, petrochemicals, machinery, transportation, railways, etc. It is mainly used for on-site maintenance of transformers in large substations and for rapid and deep processing of new oil, imported oil and other edge oils on large transmission and transformation voltage equipment and main transformer grids above 110KV; Vacuum filtration and purification treatment of expensive heavy oils such as new oil, imported oil, transformer oil, transformer system capacitor oil, and refrigeration oil; Micro water purification treatment of new oil, imported oil, and base oil.

Especially suitable for areas with an altitude of 500 meters or above.

1. Degassing, dehydrating, and filtering impurities from transformer oil. 2. Drying electrical equipment while allowing for online operation.

3. Vacuum oiling of electrical equipment. 4. When not handling oil products, it can be used to evacuate equipment.

After filtration, the water content of the oil can be less than 3ppm, the gas content can be less than 0.1%, and the pressure resistance value can be increased to above 75KV.

Transformer oil treatmentProduct advantages:

The ability to filter out impurities is particularly strong. Adopting a filter material with a composite microporous structure, it is corrosion-resistant and high-temperature resistant, with a large pollutant holding capacity, good mechanical strength, and long service life; At the same time, it can deeply filter out fine particles in the oil. Equipped with three filters, lightweight and flexible, easy to operate, no need for filter paper, and no pollution to the site.

All indicators of the product are significantly higher than the standard. Compared with a single vacuum oil filter, its dehydration, degassing, and impurity removal (mechanical impurities and free carbon) effects are faster and more efficient. The oil limit withstand voltage and flash point are higher, and the secondary filtration breakdown voltage can be increased by 35KV, reducing the harm of oil quality aging caused by multiple heating in general oil filters.

The dual vacuum with high pumping rate can greatly improve the vacuum environment inside the tank, achieving high vacuum with a limited vacuum of ≤ 5Pa and a working vacuum of ≤ 35Pa. This ensures that the oil temperature remains constant during the processing, meeting the needs of vacuum pumping on the transformer body during installation or maintenance, greatly shortening the oil processing period.

*The degassing and dehydration system, combined with a three-dimensional flash evaporation system, can quickly remove liquid water. Using UK microgram technology, it can effectively remove trace amounts of water such as dissolved water, complete the degassing, dehydration, and treatment of transformer oil, and improve the strength and quality of the oil.

A sophisticated filtration system, combined with dual mesh filtration and polymer material filter cartridges for impurity removal technology, high-quality filter cartridges, using step-by-step encryption technology, multi precision filtration, high filtration accuracy, large scale capacity, high strength, and long service life.

Schneider imported electrical system ensures high-performance operation of equipment, and the whole machine can operate with electricity. Fully automatic infrared liquid level control system, human-machine separation operation.

Humanized design, high degree of automation, equipped with a simple operating system and a safety system, fully ensuring the convenience and safety of machine operation, and can work online for a long time. *The oil pump technology maintains low noise, and the chassis structure is specially designed to ensure that there is no pollution on the ground during operation, meeting the high standards of environmental protection.

Advantage technology: On the basis of retaining all the advantages of the ZJB series vacuum oil filter, the Roots vacuum boosting system, secondary high vacuum pumping system, and secondary cycle are added, which is equivalent to the effect of two ordinary vacuum oil filters.

Compared with a single vacuum oil filter, this equipment can dehydrate, degas, and remove impurities faster and more efficiently; Higher oil limit and pressure resistance value; Machine dual-use, it is an oil filter and a vertical vacuum source, which can vacuum inject oil into power equipment; It can significantly shorten the oil treatment period for transformer installation and maintenance, and also greatly improve the oil quality indicators of various imported and new oils!

The company mainly has two types of edge oil filters:

It is ZJB series transformer oil single vacuum oil filter:Widely applicable to various industries such as power plants, power stations, power companies, metallurgy, petrochemicals, machinery, transportation, railways, etc., for vacuum filtration and micro water purification treatment of expensive heavy oils such as transformer new oil, imported oil, transformer oil, and transformer system capacitor oil and refrigeration oil; After processing,The withstand voltage value can be increased to above 55KV, with a moisture content of less than 5-8 PPM and an accuracy of 5 microns.

The second type is the ZJA series transformer oil double vacuum oil filter: the double vacuum oil filter has a high pumping rate and dual vacuum, which can maximize the vacuum environment inside the tank, achieving high vacuum. The limited vacuum is ≤ 5Pa and the working vacuum is ≤ 35Pa, keeping the oil temperature constant during the processing, meeting the needs of vacuum pumping for the transformer body during installation or maintenance, and greatly shortening the oil processing period. After processing,The withstand voltage value can be increased to above 75KV, with a moisture content of less than 3-5 PPM and an accuracy of 3-5 microns.

After sales commitment:

After sales service: The warranty period for this product is 12 months after startup; Technical services: The factory provides on-site installation, debugging, and training;

Equipment color: can be customized according to customer preferences; During the warranty period, all (non-human) equipment issues will be repaired free of charge by the factory, and all non-human damaged accessories (excluding consumables) will be free of charge. The equipment will be provided with a free set of accessories (including clamps, glass tubes, oil resistant rubber pads, and PVC steel wire reinforced hoses, each 5 meters in and out). Delivery location: Delivery location within the customer's premises, door-to-door delivery. After the equipment is put into operation, the company shall respond to the user within 2 hours upon receipt; If there is a malfunction in product quality, the supplier shall arrive at the site within 48 hours after receiving written notice from the purchaser. If there is technological innovation, the company can provide users with free technological upgrades and upgrades.

【1】 Our company's products have a one-year warranty period and provide lifetime paid maintenance services, as well as lifetime spare parts.

【2】 Our company is fully responsible for the quality of the equipment and accessories provided by users, as well as the design, manufacturing, and materials. If any technical indicators are found to be unqualified during equipment acceptance, unconditional returns can be made.

【3】 Our company is responsible for free on-site installation, debugging, and training of operational technicians.

【4】 After sales 24 hours a day, * to serve you. If the equipment malfunctions and we receive maintenance from the user, our company will respond promptly. If it cannot be resolved, our company will send personnel to the site within 24 hours to solve the problem.

【5】 We will prioritize promoting or replacing the new technologies, materials, and processes used by our company in the future research and development of new products on user devices for free.