U-shaped mechanical screw conveyor

Product Overview:

U-shaped mechanical screw conveyorSuitable for conveying granular materials in industries such as food, chemical, and plastic. Except for the motor, bearings, and frame, the rest are made of stainless steel. It can move freely and can be continuously transported in horizontal, inclined, vertical and other positions. It has good sealing and no dust leakage. It can be directly connected and fixed to its supporting equipment without the need for a foundation, utilizing the space of the factory building.

U-shaped mechanical screw conveyorScope of application:

Spiral conveyors are used in industrial sectors such as building materials, metallurgy, chemical industry, power, coal, machinery, light industry, grain and food industries. They are suitable for horizontal or less than 20 ° inclination angles to transport powders

Granular and small block materials, such as cement, coal powder, grains, fertilizers, ash, sand, coke, etc.

Usage and maintenance:

1. Operators must undergo training and pass the qualification before they can start operating.

2. The equipment shall be inspected, maintained, repaired, and lubricated in accordance with the requirements of the normal system.

3. Inspect the operation of the machine daily and ensure that there is no abnormal noise. Add appropriate bearing grease and seal for any leaks. Check the oil level in the drive gearbox every month and raise it to the required height.

Open the top cover every six months, check the wear of the spiral body and lining, and inspect the fastening of all fastening connections.

Every year: Check the wear of the seals and replace them as needed.

Every two years: the equipment undergoes disassembly and overhaul, disassembles and cleans the bearing box, replaces worn parts, replaces sealing rings and worn bushings, inspects and calibrates the spiral body, etc.

4. The speed and conveying capacity of the reducer should be selected according to the user's needs, and the conveyed materials should be ensured to be uniform and not too much or too large.

5. After material blockage and screw shutdown, the cause should be identified and the fault should be eliminated before restarting.

6. When the machine is shut down for more than three days, the internal materials of the equipment should be flushed or removed to avoid drying up and clumping (especially when the temperature is high). When the temperature is low in winter, attention should be paid to antifreeze. If clumping or freezing occurs, it should be eliminated before starting the machine.

Nanjing Xinzhengsheng Environmental Protection After sales Service

1、 We will continue to provide technical services and support to our customers. The time is generally not less than one week.

2、 During the equipment warranty period, if a system failure occurs, our company will dispatch a dedicated person to the equipment usage site within 24 hours after receiving formal written notice from the customer. Solve problems within 24 hours

3、 After the equipment is delivered to the customer, and after installation and debugging are completed, if our company exceeds the warranty period, if there is any problem with our equipment, regardless of the size of the problem, as long as the customer has a request, our company will continue to serve the customer and provide spare parts required by the customer at the factory price.

4、 Our company's product quality has a shelf life of 12 months, and we do not provide warranty for human or unintentional damage. The date of equipment delivery to the customer is the beginning of after-sales service.