-
E-mail
842990043@qq.com
-
Phone
13359272398
-
Address
5th Floor, Tongda Building, No. 10 Keji Road, Xi'an City
Product Categories
Xi'an Xinmin Electronic Technology Co., Ltd
Ultrasonic level/material gauge (resistant to high pressure and high temperature)
NegotiableUpdate on 02/10
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
XMYX ultrasonic level/material gauge (resistant to high pressure and high temperature) uses acoustic media for non-contact and wear-resistant detection of the detected object. Ultrasonic sensors can detect both transparent and colored objects, metallic and non-metallic objects, as well as solids and liquids. The surrounding environmental conditions, such as smoke or rain, will hardly affect the detection performance of ultrasonic sensors.
Product Details
1、 Product Introduction
XmyxUltrasonic level/material gauge (resistant to high pressure and high temperature)Using acoustic media for non-contact and wear-resistant detection of the object being tested. Ultrasonic sensors can detect both transparent and colored objects, metallic and non-metallic objects, as well as solids and liquids. The surrounding environmental conditions, such as smoke or rain, will hardly affect the detection performance of ultrasonic sensors.
IIXmyxUltrasonic level/material gauge (resistant to high pressure and high temperature)Product Features
(1) High resolution
(2) Short response time
(3) Digital tube displays measurement distance
(4) Complete parameter settings through RS 232/485
(5) Rich output modes: switch quantity, analog quantity RS232/485
IIIexternal structure
⑴Split standard type:
Physical image structure diagram
(2) Integrated enhanced type
M48 × 2 or G1-1/2 thread sensor M60 × 2 or G2 thread sensor
(3) Integrated explosion-proof type:
4、 Main technical indicators
merit can |
integrated type |
divide body type |
quantity Cheng |
5 meters10 meters15 meters20 meters, 30 meters40 meters、50 meters60 meters |
5 meters10 meters15 meters20 meters, 30 meters40 meters、50 meters60 meters70 meters |
measurement accuracy |
0.5%-1.0% |
0.5%-1.0% |
resolution |
3mm or 0.1% (whichever is larger) |
3mm or 0.1% (whichever is larger) |
apparent show |
Chinese LCD display |
Chinese LCD display |
analog output |
4-wire system4～20mA/510 Ω load two-wire system4～20mA/250 Ω load |
4～20mA/510 Ω load |
|
relay lose go out |
Optional2 sets of programmable AC 250V/8A or DC 30V/5A states |
(Optional) 2 sets for single channel, 4 sets for dual channelProgrammable AC 250V/8A or DC 30V/5A status |
supply electricity |
standard configuration24VDC optional220V AC+15% 50Hz |
standard configuration220V AC+15% 50Hz optional24VDC120mA Customized 12VDC or battery power supply |
ambient temperature |
display instrument-20～+60℃， probe-20～+80℃ |
display instrument-20～+60℃， probe-20～+80℃ |
through 信 |
Optional 485232 communication (manufacturer protocol) |
Optional 485232 communication (manufacturer protocol) |
Protection level |
display instrumentIP65， Probe IP68 |
display instrumentIP65， Probe IP68 |
Probe cable |
none |
Up to 100 meters, standard 10 meters |
Probe installation |
Based on the range and probe selection |
Based on the range and probe selection |
Product power consumption |
The split type is powered by a 24V power supply, with a power consumption of 100mA without a relay, 120mA with one relay, 145mA with two relays, 170mA with three relays, and 190mA with four relays The specific power is as follows: Without a relay, it is 24 × 100mA=2.4W; 1 relay is 24 × 120mA=2.9W; The 2-channel relay is 24 × 145mA=3.5W; The 3-channel relay is 24 × 170mA=4.1W; 4-channel relay is 24 × 190mA=4.6W; |
Product power consumption |
The integrated four wire system is powered by a 24V power supply, with a power consumption of 80mA without a relay, 105mA with one relay, and 130mA with two relays, The specific power is as follows: Without a relay, it is 24 × 80mA=1.9W; 1 relay is 24 × 105mA=2.5W; The 2-channel relay is 24 × 145mA=3.1W; |
Product power consumption |
The integrated two-wire system is powered by a 24V power supply and cannot be equipped with relays. The power consumption is 30mA. The specific power is as follows: Without a relay, it is 24 × 30mA=0.72W; |
Note:This series of ultrasonic probes can also be customized according to customer needs:Special probes with high pressure resistance, high temperature resistance, small diameter, and small blind spots
