Vibration monitoring instrument JM-B-35-6240 (0-200um)

Anhui Wanlong ElectricAxis vibration transmission protection table TM631-A00-B00-C00-D00-E00-F00-G00-I0-M1 0-200um 24VDCEddy current sensor specification: 11mm Proximitor model: 8300-A11-B90 Voltage: -24VDC Measurement accuracy: 4V/mm Measurement probe diameter: 11mm Installation thread: M14 * 1.5 Cable length: 9m Proximitor turbine shaft vibration transmitter TR4101HF-A00-E00-G00-S01 0-200um vibration monitoring instrument vibration/velocity/acceleration sensor; Model and specification: HM1012-B4 Measurement range: HM1012-B4/B4G: default (0-200) um (peak to peak); Protection level: IP67Anhui Wanlong Electric Vibration Sensor LT8500-03-01-0120mv/mm/s10~1000Hz LT8500YW-15-02-10 Vibration Detection Display Instrument \ \ LT3700/85B LT8500 High Temperature Vibration Speed Sensor LT3500-25 Eddy Current (Differential Expansion) Sensor LT3500-08/11/25 Eddy Current Sensor Precursor LT3500 Eddy Current Sensor Extension Cable LT8130 Vibration Temperature Liquid Level Trinity Sensor LT8500YK Integrated Vibration Sensor (with Buffer Output) LT8403 Integrated Piezoelectric Vibration Sensor (Integrated) LT8106 Chassis Thermal Expansion Sensor LT8105 Travel Displacement Sensor LT8702 Hall Speed Sensor LT3700/83 Dual Channel Shaft Vibration Monitor LT-V806 Eddy Current Sensor Static Verify LT3500-08 eddy current (shaft vibration) sensor LT3500-11 eddy current (shaft displacement) sensorNitrogen compressor bearing vibration transmitter TM631-A00-B00-C00-D00-100-F00-G00-10-M1, range 0-200um, installation thread M10 * 15 * 10, currentOutput: 4-20mA, DC24V power supply, with matching installation nut vibration transmitter JM-B-35 (0-500um/s) brand Anhui Wanlong Electric vibration temperature oil level transmitter SWZT-3F specification: 180 with wiring integrated vibration sensor model: HZD-B-5, specification: 0-200um specification: 0-20mm/s, DC24V, 4-20mA, with strong magnetic seat KRHY-QC axis vibration transmitter HZD-Z-6AD-A2-B2-C2-D1 axis vibration transmitter HZD-Z-6AD-A2-C2-D1 specification 0-200um Anhui Wanlong Electric extension cable JK806-XL-080-090-KZ material 2: vibration probe JK8006XL-10 brand Anhui Wanlong Electric

Mainly applicable to fields such as water conservancy, electricity, steel, metallurgy, chemical industry, petroleum, and mineral resources, it continuously monitors and measures the vibration of various rotating machinery in real-time. Facilitate users to understand the real-time operation status of the device, and conduct analysis and maintenance. When the vibration of the equipment exceeds the normal value, the vibration monitor will immediately issue an alarm and danger signal, so that your equipment can be protected in a timely manner

The bearing vibration monitor can measure the vibration of the casing or structure relative to free space, that is, vibration. It is particularly suitable for machines with ball bearings, where the vibration of the shaft can be transmitted to the casing. Therefore, the monitor can be equipped with a vibration speed sensor to continuously measure and protect the rotating machinery. The installation of the sensor should be particularly careful not to reduce the amplitude of the sensor, nor to change the frequency effect or generate signals that cannot represent the true vibration of the machine. This monitor is particularly suitable for situations where a large number of vibration points need to be measured, such as motors, compressors, fans, etc.
Function Description:
1. Display the vibration measurement value, I value alarm, and II value alarm set value, which can be displayed separately on the LED digital tube.
2. Alarm function: When the vibration amplitude exceeds the alarm set value, the alarm indicator light will turn on, and at the same time, a switch signal will be output on the rear panel to protect the monitored equipment.
3. Alarm delay time setting function: The alarm delay time adjustment range is 0-3 seconds to prevent false alarms caused by on-site interference.
4. The self diagnostic function has the ability to detect power on and power off, and disconnect the alarm output circuit, which can effectively suppress false alarms of the instrument.
5. The output interface is equipped with a current output interface, which can be connected to devices such as computers.

It can measure the absolute vibration amplitude of bearings in various rotating machinery and monitor the vertical and horizontal vibration of rotating machinery. It is particularly suitable for machines with ball bearings, where the vibration of bearings can be transmitted to the casing for continuous measurement and protection of rotating machinery. Special attention should be paid to the installation of sensors to avoid reducing the amplitude of the sensor, changing the frequency effect, or generating signals that cannot represent the true vibration of the machine. This monitoring instrument is particularly suitable for situations where a large number of vibration points need to be measured, such as motors, compressors, fans, etc.
The main function is to monitor and protect the bearing vibration of rotating machinery such as steam turbines, water turbines, compressors, and blowers.
Function Description (Intelligent Type):
1. Display the vibration measurement value, I value alarm, and II value alarm set value, which can be displayed separately on the LED digital tube.
2. Alarm function: When the vibration amplitude exceeds the alarm set value, the alarm indicator light will turn on, and at the same time, a switch signal will be output on the rear panel to protect the monitored equipment.
3. Alarm delay time setting function: The alarm delay time adjustment range is 0-3 seconds to prevent false alarms caused by on-site interference.
4. The self diagnostic function has the ability to detect power on and power off, and disconnect the alarm output circuit, which can effectively suppress false alarms of the instrument.
5. The output interface is equipped with a current output interface, which can be connected to devices such as computers, DCS, PLC systems, and paperless recorders.

The vibration monitoring table is based on a microcontroller and has relative vibration monitoring and protection functions
Absolute vibration monitoring and protection, secondary alarm setting, analog voltage output, analog current output, etc
function Can be easily connected to DCS, PLC systems, or paperless recorders.
Application: Suitable for monitoring and protecting shaft vibration or bearing vibration of rotating machinery in industrial sectors such as power, petroleum, and chemical.