Vibration probe RS177230-01-01-05

Vibration probe RS177230-01-01-05It is a BENTLY NEVADA vibration monitoring mechanical protection product from the United States. This sensor is a simple circuit powered device that is easy to install and maintain, reducing the need for training and service. It can be directly connected to PLC or DCS control systems for factory machine monitoring. This sensor can help you better manage downtime, optimize maintenance plans, and avoid unforeseen mechanical failures.

Vibration probe RS177230-01-01-05Bentley integrated vibration transmitter sensors are used for the vibration of large rotating machinery shafts such as steam turbines, motors, blowers, compressors, air compressors, gearboxes, and water pumps, and are applied in industries such as power, petroleum, chemical, and metallurgy.

177230-01-01-05 (CN) The characteristics of the Bentley integrated vibration transmitter sensor include: connection with PLC and control systems (DCS and SCADA) through interfaces;

Common interface connections with PLC or control system inputs. Through the familiar curve interface, it can be quickly operated and maintained.

No on-site configuration or adjustment required; The entire system rarely requires additional components; Including technical support for monitoring customers' equipment; Including self inspection; Built in protection interface; Support multiple interface cables; Provide reproducible data in a simple data format; Provide raw vibration signals for analysis and verification. Built in reliable and powerful CM design implementation industry standard 4-20mA loop power converter

Sensitivity - Main circuit (signal one) 0.0 to 25.4mm/s (0 to 1.0in/s) ± 10%, direct effective value (root mean square)

Diameter: 25.4mm (1.00in)

Height: 66.0mm (2.60in)

Shell material: 304L stainless steel

Connector: 3-pin MIL-C-5015, stainless steel

Installation holes in the body 1/4-28 UNF

Connecting cable, unarmored 16925-AA, such as 16925-33 (10 meters)

Connect cable, armored 16710-AA, such as 16710-20 (6 meters)

The YSD-2 lead method is a three wire system. The lead interface is a four hole socket. Among them, pin 1 is connected to a+24V power supply; Connect 2 pins to the other end of the 4-20mA interface. 3. Connected to the ground level of the+24V power supply, it is connected to the outer shell of the sensor and connected to the 4-pin connection.