W4-72, W4-73, W5-47, W9-19 high-temperature fans

Installation form of W4-72, W4-73, W5-47, W9-19 high-temperature fans:

1. The outlet position of the high-temperature fan is represented by the angle of the air outlet of the casing. Fans No. 1.5-6 are all made into an adjustable type when they leave the factory, and the user unit installs them in the required position according to requirements. The adjustment range of the air outlet position is 0 ° to 255 °, with an interval of 45 °. The transmission mode is all "A" type direct drive.

2. There are two forms of W4-72, W4-73, W5-47, and W9-19 high-temperature fans. From one side of the motor, if the impeller rotates clockwise, it is called a right cyclone machine, represented by "right"; The impeller rotating against the needle is called a left cyclone machine, represented by "left".

The purpose of W4-72, W4-73, W5-47, W9-19 high-temperature fans

1. Applied to the drying industry, boiler industry, cleaning industry, coating industry, and food drying industry.

2. The operating temperature is between 100 ℃ and 180 ℃.

3. The transported gas is air or other non self igniting, non exploding, non entangling, non corrosive to human body and steel materials. It can also be used to transport non corrosive, non self igniting, and non viscous hot gases, vapors, and smoke in various industries. Other materials with similar performance can also be selected, but the temperature of the conveying medium must not exceed its rated temperature range.

4. There shall be no viscous substances in the gas, and the dust and hard particles contained shall not exceed 150mg/m3. If the dust content is high, a dust removal device with a readiness of not less than 85% should be installed in front of the fan to reduce the dust content of the flue gas entering the fan and improve the service life of the fan.