Water quality aeration vortex blower

Water quality aeration vortex blower

Water quality aeration vortex blowerThe motor technology is carefully crafted, dedicated to providing you with a user experience; And all motors are made of copper wire winding, combined with high-temperature bearings to form a product; Fufeng brand fans pay more attention to the manufacturing of the casing and impeller. The casing of the fan products adopts high-pressure die-casting production technology, and the fan impellers provided to customers are calibrated using high-speed dynamic balancing machines. The quality of each fan can withstand the test.

Fufeng Vortex BlowerProduct Features

Our company's series of high-pressure blowers have greatly improved their adaptability and versatility by optimizing and improving the pump body and impeller; The series of high-pressure fan products mainly have the following characteristics:

(1) By using an AC motor as the drive, the impeller is directly installed on the motor rotor shaft to achieve continuous and efficient operation without contact compression.

(2) By utilizing dual frequency wide voltage technology, the machine meets the needs of different regions for current frequency and voltage, with advantages such as good frequent start-up performance, strong overload capacity, and safety and reliability.

(3) Adopting a balanced configuration to achieve arbitrary installation of the product, the Fufeng fan maintains long-term continuous balanced operation; This structure has a fast heat dissipation speed, ensuring the reliability of the fan even in high-pressure environments.

(4) The whole machine adopts an oil-free device and does not require lubrication. To broaden the application scope of the product, it can be used in medical equipment with strict air quality requirements, precision printing in the printing industry, and integrated circuit manufacturing processes in the electronics industry. Fufeng fans work efficiently without the need for other auxiliary equipment and reduce operating costs.

(5) After optimizing the impeller and air duct, blade length, air duct curvature, and curvature, the product has low wind noise.

(6) Has: smooth operation, low noise, energy saving; Positive and negative pressure, flow rate, efficiency and other indicators meet our company's execution standards; Fufeng fan has a compact structure, light weight, and small volume; High working pressure difference, dual-use for blowing and suction.

Fufeng Vortex BlowerPrecautions during installation:

1. Inspect the inside of the casing and other parts of the casing to prevent any tools or debris from being left behind;

2. The pump and air duct are connected using flexible hoses (made of non combustible materials), with a length of no less than 200mm and a diameter equal to the inlet and outlet dimensions of the fan. To ensure that the hose does not twist or deform during system operation, it should be installed with moderate tightness. For the hose installed at the suction end of the fan, a slightly tighter and more elastic hose can be installed to prevent the fan from being sucked in or deflated during operation, reducing the cross-sectional size of the hose;

3. Ensure the horizontal position of the spindle and measure the concentricity between the spindle and the motor shaft, as well as the non parallelism between the two end faces of the coupling. The non parallelism uniformity of the two axes is 0.05mm, and the non parallelism uniformity of the two end faces of the two axes is 0.05mm;

4. The steel bracket of high-power fans must be fixed on a concrete foundation, and rubber vibration damping pads must be added between the steel bracket of the fan and the foundation. All fan and motor components are installed on a single steel bracket, and the steel ground frame is installed on the vibration damping pad at the top of the foundation. It is best to use a multi hole rubber plate for the vibration damping pad;

5. The diameter of the outlet of the high-pressure vortex air pump can only be increased and cannot be decreased. Finally, an insect proof net should be installed at the air outlet, and a wind and rain cap should be added when the air outlet is biased upwards;

6. After installation, try to rotate the transmission group and check for any tightness or collision with the fixed parts. Any deficiencies found must be adjusted properly.

Application scope of Fufeng vortex blower:

1. Blowing (positive pressure)

2. Air supply for gas or heavy oil burners

3. Used for cleaning and drying empty bottles of food beverages or filling empty bottles

4. Used for collecting waste materials from various packaging machines including plastic, paper, cloth, etc. after cutting edges

5. Dust removal and dehumidification of substrate circuit boards used in the electronics industry

6. Accelerated fermentation for livestock manure storage tanks facilitates environmentally friendly wastewater treatment

7. Enhanced effect of electrolyte agitation for electrolytic cells in electroplating industry

Our company's after-sales and service

1. The company agrees that in the event of damage due to defects in parts or manufacturing defects during normal use It can be repaired immediately or replaced with a new product free of charge within one year after sale.

If it is due to improper use by the customer Repair of damage caused by unauthorized installation of accessories or self modification of the machine body Reasonably charge maintenance fees.

3. Damage caused by natural disasters or harsh operating environments Although it is difficult to accept within the warranty period.

If it is not possible to obtain proof of shipment date, the manufacturing date on the motor nameplate shall prevail.

5. Our company is responsible for the products Not exceeding the original selling price of the product.