Wear resistant ceramic knife gate valve supply - valve body

NegotiableUpdate on 05/16

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Wear resistant ceramic knife gate valve supply: Ceramic knife gate valve, also known as ceramic knife gate valve, ceramic wear-resistant knife gate valve, thin ceramic slag discharge valve, thin ceramic slurry valve. Its opening and closing component is a gate, and the direction of movement of the gate is perpendicular to the direction of the fluid. The medium is cut off by a blade shaped gate that can cut fiber materials.

Product Details

Wear resistant ceramic knife gate valve supply

working principle

Suitable for opening and closing pipelines using high hardness particles and other media, as well as media with soft particles but corrosive properties. The product is widely used in solid, liquid-solid, gas-solid two-phase medium transportation systems such as ash, sludge, coal slurry, ore slurry, and sewage, especially suitable for pebble coal systems in thermal power plants. Manual, pneumatic, and electric driving methods can be used.

The sealing surface material of the gate and valve seat is made of structural ceramics, which are wear-resistant, corrosion-resistant, and high-temperature resistant. The sealing surface is made of hard sealing and the part in contact with the medium is made of structural ceramic material, with chemical stability and hardness *. Therefore, this valve has excellent wear resistance, corrosion resistance, and erosion resistance, as well as good insulation and low thermal expansion.

Wear resistant ceramic knife gate valve supply

Performance Characteristics

Choose toughening materialsengineering ceramicsMaterial, more wear-resistant!

The sealing components and vulnerable overcurrent components of the engineering ceramic knife gate valve are made of toughened engineering ceramic materials; Capable of withstanding wear and erosion of particulate media in high-speed fluids, with a long service life for valves; The cost-effectiveness is 10 times higher than that of ordinary valves.

Special structural design with dual functionality!

Specially designed for medium pipelines in solid-liquid two-phase flow conditions, with a structural form aimed at resisting throttling erosion, to meet the dual use function of shut-off or shut-off+throttling of such medium pipelines.

Valves are lightweight, easy to install, and highly adaptable!

Adopting ultra short structural length, saving materials, and reducing the overall weight of the pipeline system; Occupying a small effective space, it can effectively support the strength of the pipeline, reduce pipeline vibration, and is suitable for installation at any angle on pipes of different layouts.

Diversified driving methods, convenient and fast!

Ceramic knife gate valves have multiple driving modes including electric, manual, electro-hydraulic, and manual hydraulic. For electric and electro-hydraulic driven valves, remote control and opening indication can be effectively achieved. If the valve is throttled or adjusted, the opening remote adjustment error can be controlled within 1.0mm, and the self-locking performance is good during operation.

Scope of application

1. Mining and steel industry - used for coal, filter slurry, etc;

2. Purification device - used for wastewater, mud, dirt, and clarified water with suspended solids;

3. Paper industry - used for any concentration of pulp, feed water mixture;

4. Power plant ash removal - used for ash slurry.