X-HC-A02-B01 Integrated Hall Speed Sensor

X-HC-A02-B01 Integrated Hall Speed Sensor X-HC-A02-B01 Integrated Hall Speed Sensor

1、 Product Introduction:

Hall effect speed sensor is a small enclosed speed sensor. It has the advantages of stable performance, low power consumption, strong anti-interference ability, and wide temperature range for use. The principle is that when the magnetic field lines pass through the sensing element on the sensor, a Hall potential is generated, which is amplified and shaped by the Hall chip to generate a force electrical signal for use by the secondary instrument. It is connected to the measured shaft through a coupling, and when the shaft rotates, the angle of rotation is converted into a pulse signal for use by the secondary instrument. This sensor has the characteristics of small size, simple structure, no contacts, low starting torque, long service life, high reliability, good frequency characteristics, and can be continuously measured.

2、 Technical indicators:

1.detection distance:≤2mm

2.Maximum current20mA

3.Input frequency range:0～10KHz

4.Output signal:0～20VRectangular pulse

5.Temperature range for use:-20～＋80℃

6. Input voltage:+12～24V

7.relative humidityNot exceeding 85%

8. Thread specification: M16×1 Sensor:L=80mm（Or customized

3、 Detecting gears:
1. Modulus: m ≥ 1
2. Gear thickness: ≥ 4mm
3. Tooth profile: involute or trapezoidal straight teeth
4. Gear material: Magnetic material