Zibo acid unloading pump quotation

The quotation for the acid unloading pump in Zibo is due to excessive resistance in the pipeline and improper pump selection. Equivalent elimination methods: check and remove blockages. Adjust the direction of the motor and tighten the motor wiring. Tighten all sealing surfaces and eliminate air. Open the pump cover or open the exhaust valve to exhaust the air. Stop checking and adjusting (this phenomenon is prone to occur when using grid connected water pipes and suction pumps). Reduce pipeline bends and reselect pumps. Insufficient water pump flow. First, check according to the cause. The pipeline, pump flow channel impeller are partially blocked, scale is deposited, and the valve opening is insufficient. The voltage is too low. Impeller wear. The corresponding exclusion method: First, press the exclusion button. $r $n stainless steel chemical magnetic pump is an application of modern magnetic force

1、 Overview of Stainless Steel Chemical Magnetic Pump:
CQB type fluorine lined magnetic pump is a chemical process pump that applies modern magnetic mechanics principles and uses permanent magnets to achieve non-contact indirect transmission. When the motor drives the outer rotor (i.e. outer magnetic steel) assembly to rotate, the magnetic field lines pass through the isolation sleeve and drive the inner rotor (i.e. inner magnetic steel) assembly and impeller to rotate synchronously through the magnetic field. The medium * is enclosed in the stationary isolation sleeve, thus achieving the purpose of leak free pumping of the medium, solving the shaft seal leakage of mechanical transmission pumps. The fluoroplastic magnetic pump, whose overcurrent components are all made of fluoroplastic, has reasonable design, advanced technology, full sealing, leak free, corrosion resistance and other characteristics. Its performance has reached the advanced level of similar products in the world and has widely replaced imported magnetic pumps.
CQB type fluorine lined magnetic pump is an ideal pump for eliminating running, emitting, dripping, and leaking phenomena in chemical processes, eliminating environmental pollution, creating a "leak free workshop" and "leak free factory", and achieving safe and civilized production.
In the 21st century society, energy and environmental issues have become global concerns, and water and air, as precious resources for humanity, have been increasingly valued. How to reduce pollution, protect ecological balance, and solve environmental problems has attracted high attention from various decision-making departments and academic research departments. In today's era, while vigorously developing social productivity and improving living standards, we have also caused serious damage to the environment, posing a serious threat to our survival. Nowadays, water and air are increasingly valued as precious resources for human beings. Especially with the acceleration of industrial processes, a large amount of wastewater and exhaust gases have been discharged from water and air, which contain a large amount of toxic organic compounds that can accumulate in the human body, posing a huge threat to human health.

2、 Characteristics of Stainless Steel Chemical Magnetic Pump Products:
The design of CQB fluoroplastic magnetic pump not only has the advantages of compact structure, beautiful appearance, small volume, low noise, and reliable operation of ordinary magnetic pumps, but also all its overcurrent components are made of the world's most corrosion-resistant "plastic king" (fluoroplastic), and the isolation sleeve is made of special materials, which have high-strength mechanical properties and eliminate the magnetic eddy current phenomenon of ordinary magnetic pumps. Therefore, CQB fluoroplastic magnetic pump can continuously transport corrosive media such as acids, alkalis, oxidants, etc. of any concentration (strength) without damage. Applicable temperature: -30 ℃ -100 ℃. This series of magnetic pumps can be equipped with pump protectors to prevent damage to pump components or supporting motors caused by idle operation or overload of the unit.

Regularly check for running, emitting, dripping, and leaking. Compressed air leakage between 1% and 25% is typical in most systems. Compressed air leakage requires the unit to continuously load to meet pressure requirements, which consumes more electrical energy. Oil system leakage accelerates oil loss and increases the cost of replenishing oil. Therefore, it is necessary to regularly check for leaks in the compressed air pipeline network and inspect for leaks in the oil circuit. To reduce production costs. D. Regularly add lubricating grease to the motor. E. Regularly measure current and voltage. A 1% imbalance in three-phase voltage can cause a phase current to exceed 1%; An imbalance of 3.5% in three-phase voltage will increase the temperature rise of the motor by 25 ℃.
3、 Purpose:
CQB fluorine lined magnetic pumps are widely used in chemical, acid, alkali, smelting, rare earth, dye, pharmaceutical, papermaking, electroplating, acid washing, radio, scientific research institutions, national defense industry and other units to pump acid, alkali, rare and valuable oil liquids, venom, volatile liquids. Especially for the pumping of liquids that are prone to leakage, flammable, and explosive. Choosing a matching explosion-proof motor is more ideal.

Applicable temperature: -20 ° C to 100 ° C.

A safety valve that opens or closes proportionally throughout the entire range of opening heights or within a considerable range of opening heights. Fully open safety valve. A safety valve that opens proportionally only within a small opening height range and then suddenly opens to the fully open position. The opening height shall not be less than 1/4 of the channel diameter. Micro opening safety valve. It is a direct acting safety valve used only for liquid media. The opening height is within the range of 1/4 to 1/2 of the channel diameter. Open pressure (rated pressure). The inlet pressure at which the safety valve disc starts to rise under operating conditions, and at this pressure, there is a measurable opening height, and the medium is in a continuous discharge state that can be supported by visual or auditory branches.