ZOY-1 Zirconia Oxygen Analyzer
The ZOY zirconia oxygen analyzer can quickly and accurately monitor and analyze the flue gas content generated by combustion equipment such as boilers, kilns, and heating furnaces during the combustion process, in order to achieve low oxygen combustion control, save heat energy, achieve environmental protection and energy conservation, and reduce environmental pollution.
Application field
Widely used in power plants, steel mills, cement, metallurgy and other industries to monitor the oxygen content of flue gas in the furnace or flue of industrial heating devices such as boilers, kilns, industrial heating furnaces, and homogenization furnaces.
Instrument features
Imported chip manufacturing, digital display, clear and stable
※ Standard gas can be used for calibration and verification during on-site operation
※ Probe flange installation, probe zirconium tube can be easily disassembled and replaced
※ Simple wiring, standardized installation dimensions, reasonable circuit design, and advanced process quality
※ The instrument performance is stable and reliable, and easy to debug
Main technical indicators
Range 0~25% O2
Basic error<+3% F. S
Instrument accuracy level 1
本底修正 -20ｍ Ｖ~+20ｍＶ
The measured flue gas temperature is lower than800℃(Low temperature type);800℃~1200℃(High temperature type)
Output signal 0~10mA4-20mA optional
Load capacity 0~1.2K Ω (0~10mA) or 0~600 Ω (4~20mA)
Environmental conditions 0~50℃Relative humidity<90%
Power supply 220V+10%, 50Hz
The power consumption transmitter is about 8W, and the average power consumption of the heating furnace is 50W
Response time of 90%, approximately 5 seconds
Heating time for zirconia probe heating furnace: about 20 minutes
Dimensions 160 × 80 ×120mm
Probe length L=400mm，800mm，1200mmoptional
