water hammer arrester

The SD9000 water hammer absorber is a device used to eliminate water hammer shock waves caused by various reasons in pipelines and protect pipelines and equipment from damage. Suitable for various water supply and drainage systems such as industrial and mining, enterprises, high-rise buildings, power stations, etc., it utilizes the expansion and contraction of air in the piston chamber to buffer sudden shock waves and alleviate their intensity, thus avoiding equipment damage caused by huge water hammer impact to the greatest extent possible. Generally installed on pipeline systems near water hammer sources, when water hammer occurs, the enormous function of the liquid in the pipeline system acts on rigid pipes and fittings, causing energy to be unable to be released, resulting in destructive force and annoying noise production. And installationwater hammer arresterIn the future, the enormous kinetic energy of liquids can be transmitted throughThe deviceThe piston compresses air and converts energy, reducing the destructive force of water hammer, eliminating noise, and protecting the pipeline network.

Notes:
1. The pressure gauge on the valve body displays the pressure in the valve chamber before installation and the pressure in the pipeline after installation.
2. Please confirm before installation that the chamber pressure of the equipment should not exceed the pipeline pressure.
3. When the head is above 50m and the pressure is above 5Kgf/cm2, it is recommended to install one under the long pipeline and one at the corner above the check valvewater hammer arrester.
4. For maintenance purposes, it is recommended to maintain a 10cm gap between the valve body and the wall to facilitate maintenance operations.
5. If the water pressure in the pipeline is low, orThe deviceIf the pressure in the chamber is low, it can be appliedThe deviceAdd or release air pressure to the upper air injection plug.
6The deviceMaintain chamber pressure at 50%~70% of pipeline pressureThe deviceeffect
7. The secondary side is suitable for open pressure applications, such as water level valves, bathroom appliances, and water injection with a gas injection rate of 1-1.3Kgf/cm2.