How to choose a suitable machine tool oil mist purifier

CNC machine tools are modern equipment that generates a large amount of oil mist during operation. This oil mist must be purified and absorbed by industrial oil mist purifiers, otherwise it will have varying degrees of impact on the health of workers, factory equipment, and plant safety.

The hazards of machine tool oil mist

1. Harm to physical and mental health: Oil mist, dust, and emulsion mist can cause harm to the lungs, throat, skin, and eyes of workers. The polluted workshop environment can also make workers feel irritable and depressed, reducing work efficiency.

2. Easy to cause safety accidents: The diffusion of oil mist can easily cause the floor to slip, which may lead to personal safety accidents, and with the increase of inventory, it can increase the risk of fire.

3. Impact on machine use: Due to the rapid and widespread spread of oil mist, the accumulation of oil stains can cause malfunction of machine tools and other electronic components. Moreover, the diffusion of oil mist can reduce the effectiveness of cooling and heating system equipment, increase energy consumption, and shorten service life.

4. Destroying the environment and wasting resources: If oil mist is directly discharged outdoors, it will damage the environment and waste machine tool cutting fluid that could have been purified and recycled.

To choose a good machine tool oil mist purifier, it is necessary to first understand that if the thread grinder is not equipped with a mist absorbing device, it will cause problems such as indoor oil mist dispersion and air turbidity. These environmental problems can directly lead to occupational diseases among workers. Therefore, it is necessary to install corresponding environmental protection equipment to reduce the mechanism of oil mist emissions from the thread grinder, and then choose a suitable machine tool oil mist purifier.

The oil mist generated during the grinding process of a thread grinder mainly comes from the following three aspects:

Firstly, the promotion of high-speed grinding wheels involves throwing out cooling oil to generate oil mist. This is because in the grinding process of grinding machines, a large amount of cooling oil is required. When some of the cooling oil is sprayed onto the grinding wheel, the high-speed rotating wheel generates a huge centrifugal force, which throws out the oil and releases some oil droplets into the air, forming oil mist

Secondly, the cooling oil impacts the workpiece and tool, splashing oil mist. During the grinding process, a large amount of cooling is sprayed onto the workpiece, splashing oil droplets and partially forming oil mist.

Again, when the cooling oil is heated, it will form an oil mist because during the grinding process, the high grinding temperature at the contact point of the workpiece causes the sprayed cooling oil to be heated and eventually evaporate to form an oil mist.

It is not difficult to see from the above three points that a large amount of cooling oil will turn into oil mist during use, and the vast majority of these oil mist do not react to generate carcinogenic gases or other harmful substances. Therefore, considering economic benefits, it is recommended to use recyclable machine tool oil mist purifiers, which mainly use physical methods to purify oil mist. For exampleMachine tool oil mist purifierIt's a good choice.