3000W vortex air pump

3000W vortex air pump

3000W vortex air pumpDuring operation, the current consumed by the motor will increase with the increase of pressure and vacuum degree. If the current is too high, it will cause the contactor to trip. To prevent tripping or save electricity, please increase the cross-sectional area of the air outlet as much as possible, or install a wind pressure and air volume regulating valve on the suction or exhaust side.

3KW vortex air pumpThe main parameters for selection are power, air volume and pressure (which require certain requirements for calculation), voltage, etc. Due to the widespread use of vortex air pumps, their selection method is the same as that of high-pressure fans. Generally speaking, the following two steps need to be followed: 1. Determine the function of the high-pressure fan used on site, whether it is suction or blowing, and find the corresponding pressure flow curve of the high-pressure fan; If the curve is misread, sometimes the selected product cannot be used; 2. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure fan model based on the working curve; As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relatively accurate data, relevant calculations need to be carried out. This needs to be done by professional designers or consulted with professional companies.

Precautions for use
No matter which brand it is3KW vortex air pumpBoth require protection in two aspects: pressure and dust.
For pressure, a pressure relief valve is often used, which is an unloading valve. When the operating pressure of the high-pressure fan exceeds the set pressure of the pressure relief valve, the pressure relief valve will automatically open to release the excess pressure and protect the high-pressure fan.
For dust, filters are often used. It often uses filter cartridges with different filtration accuracies according to different usage scenarios. Different filter cartridges have different maintenance methods and service lives, which need to be clarified when ordering.
In some special occasions, special protection is also necessary: for example, when using in a sealed environment, attention should be paid to ventilation and heat dissipation; When the ambient temperature (intake temperature is relatively high), it is more important to pay attention to ventilation and heat dissipation, or choose a high-pressure fan that allows for a higher intake temperature (such as a full air ring blower that allows for an intake temperature of up to 130 ° C);
For certain brands of high-pressure fans, there may be their own usage recommendations. Before purchasing, it is important to have a detailed understanding.

3KW vortex air pumpPerformance characteristics:
1. * Type, noiseless: The motor runs directly, and by adding an integrated sound suppression device, the high noise of the high-pressure fan is improved, thus achieving the effect of *.
2. High reliability: When the usage situation changes, the machine can still operate safely. Apart from the impeller, the high-pressure blower has no other actions, so its high reliability is almost maintenance free. Using precision outer bearings with good heat dissipation, it has the following advantages: high compression ratio; The operating temperature of the bearing is low; Long service life of lubricating grease; No maintenance required.
3. Easy to install and fully equipped, can be installed and used at any time for compressed air or vacuum pumping, and can also be installed in any horizontal or vertical direction.
When the impeller rotates without oil or pollution, it does not come into contact with any parts and is lubrication free, thus ensuring no pollution.
5. Zui High Quality After 20 years of professional manufacturing experience, Zui Precision Machinery Design, combined with careful motor and standard instrument testing, all parts can meet Zui's high quality requirements. Using standard IP54, F-class motors have high efficiency and very few faults. There is a shaft seal test between the motor and the blower to prevent foreign objects from entering. At the same time, to ensure functional effectiveness, each blower undergoes strict testing before leaving the factory.

3KW vortex air pumpExcellent operational balance performance, high mechanical precision, and extremely precise balance design, testing, and calibration of the operating parts, resulting in extremely low vibration rate. We have demonstrated through practical applications in water treatment and electroplating that even stirring and water wave rolling height *.

Taiwan, China 3KW vortex air pump