High temperature resistant blower

CXHigh temperature resistant blower

CXHigh temperature resistant blowerThe front end of the fan blade has a heat sink for heat dissipation, while the bearing at the back end works under the built-in cooling fan of the fan, thus keeping the bearing working at low temperatures.

All of our company'sThe product will be delivered to the address agreed upon with the customer in the contract by a third-party professional logistics company or courier company commissioned by each logistics center. Our quality service will be delivered throughout the entire logistics process.

Installation precautions: 1 Installation location: It must be installed indoors in a place that is not affected by wind and rain
2. Environmental temperature: below 40 ℃
3. Relative humidity: below 80%
4. Air quality: If there are corrosive or flammable gases such as acids and alkalis in the air, they should not be transported by high-pressure blowers to avoid danger
5. Dust protection: Avoid using in places with large amounts of dust, powder, or fibers. If it is necessary to use in such places, please install a filter and regularly clean the dust attached to the filter and inside the high-pressure blower
6. Ventilation and heat dissipation: Please choose to use it in a well ventilated place and not in a sealed room or box
7. Placement space: For the convenience of column maintenance or repair, please avoid installing in overly narrow locations
8. Avoid vibration: Please install in a vibration free location; If the vibration in the venue is unavoidable, anti vibration measures must be installed to prevent the high-pressure blower from being damaged by external vibrations.

Performance characteristics:
1. * Type, noiseless: The motor runs directly, and by adding an integrated sound suppression device, the high noise of the high-pressure fan is improved, thus achieving the effect of *.
2. High reliability: When the usage situation changes, the machine can still operate safely. Apart from the impeller, the high-pressure blower has no other actions, so its high reliability is almost maintenance free. Using precision outer bearings with good heat dissipation, it has the following advantages: high compression ratio; The operating temperature of the bearing is low; Long service life of lubricating grease; No maintenance required.
3. Easy to install and fully equipped, can be installed and used at any time for compressed air or vacuum pumping, and can also be installed in any horizontal or vertical direction.
When the impeller rotates without oil or pollution, it does not come into contact with any parts and is lubrication free, thus ensuring no pollution.

Our services
1. Professional sales engineers provide users with overall design solutions and help them consult and solve problems in a timely mannerThe use of;
2. Dedicated sales and service personnel to assist users in the installation and debugging of products and hosts;
3. Promote product performance and maintenance of oil pipes to users;
4. The company has sufficient spare parts to ensure that user equipment can receive timely maintenance and repair;
5. Consult or visit users and keep records of their usage, and provide feedback to relevant departments;
6. The service principle is to serve customers with * service, maximum speed, and * attitude.

The selection method is the same as that of high-pressure fans. Generally speaking, the following two steps need to be followed:
1. Need to determine what function of the high-pressure fan is used on site, whether it is suction or blowing, and find the corresponding pressure flow curve of the high-pressure fan; If the curve is misread, sometimes the selected product cannot be used;
2. Based on the calculated pressure and flow rate, find the working curve above the corresponding working point that satisfies both pressure and flow rates on the curve graph; Then select the high-pressure fan model based on the working curve;
As long as it is a different work site, its requirements for pressure and flow rate are different, so in order to obtain relatively accurate data, relevant calculations need to be carried out. This needs to be done by professional designers or consulted with professional companies.