Circular high-pressure air pump

Circular high-pressure air pumpCommon Parameters

1. Pressure: The pressure of a centrifugal fan refers to the increase in pressure (relative to atmospheric pressure), which is the value of the increase in gas pressure inside the fan or the difference in gas pressure at the inlet and outlet of the fan. It can be divided into static pressure, dynamic pressure, and total pressure. Performance parameters refer to total pressure (equal to the difference between the total pressure at the outlet and inlet of the fan), commonly measured in units such as Pa, KPa, mH2O, mmH2O, etc.
2. Flow rate: The volume of gas flowing through a fan per unit time, also known as air volume. Commonly used Q to represent, the commonly used unit is; M3/s, m3/min, m3/h (seconds, minutes, hours). Sometimes "mass flow rate" is also used, which refers to the mass of gas flowing through the fan per unit time. At this time, it is necessary to consider the gas density at the fan inlet, which is closely related to the gas composition, local atmospheric pressure, gas temperature, and inlet pressure. Conversion is required to obtain the desired "gas flow rate".
3. Speed: The rotational speed of the fan rotor. Often expressed in n, its unit is r/min (r represents speed, min represents minutes).
4. Power: The power required to drive a fan. It is often represented by N and its unit is Kw.

Circular high-pressure air pumpApplication Introduction:

1. Textile equipment: vortex high-pressure fan, vortex air pump, high-speed sock weaving machine; Coating thickness control and ensuring uniform thickness, removing moisture, drying, and yarn drawing machine.
2. Plastic auxiliary machine and central feeding system: In the use of the casting machine, in order to ensure high-speed production, uniform casting film, and cooling
The wind blade on the roller forms a thin layer of air between the film and the cooling roller surface, and the vortex air pump evenly cools the film; Simultaneously used for vacuum feeding, drying, dehumidification, and central feeding system of injection molding machines.
3. Computer monitors, LCD monitors, printed circuit boards, and other products can be used in printed circuit board equipment such as vortex air pump cleaning, water cutting, and drying.
4. In wire and cable equipment, it can remove moisture, oil, dry, and suppress static electricity, such as removing water from precision copper pipes for air conditioning.
5. Effective control of coating thickness and ensuring uniform thickness in painting equipment; Can dry, remove moisture, dry at high temperatures over a large area, and control coating thickness; After electroplating, metal surface treatment such as cutting, drying, and degreasing.
6. High pressure vortex fan is used for pneumatic conveying of cans; The use of cutting water, drying, and other food and beverage filling equipment before coding or labeling beverage bottles, cans, and various packaged foods.
7. Printing equipment: screen printing machinery; UV polishing machine, instant drying of ink within 1-5 seconds after printing.
8. Air treatment equipment that can be used for the collection, purification, and recycling of toxic and harmful gases; Gas detection equipment for atmospheric environment.
9. Specially suitable for cleaning equipment such as sonic cleaning machines, PCB board cleaning and drying machines in the electronics industry, tunnel type car cleaning machines (car washing machines), commercial dishwashers, glass cleaning machines, etc.