Circular vortex air pump

Circular vortex air pumpFeatures:

(1) The project uses an AC motor as the drive and directly installs the impeller on the motor rotor to achieve non-contact compression, ensuring that the vortex air pump can maintain continuous and efficient operation for up to 20000 hours under zero maintenance.

(2) By using dual frequency wide voltage technology, the protection level reaches IP55 (insulation level F or H), meeting the needs of different regions for current frequency and voltage. It has the advantages of good frequent starting performance, strong overload capacity, fast automatic protection starting, safety and reliability.

(3) Adopting a pre bearing structure, the pump bearings are installed outside the compression chamber to achieve the maximum dynamic balance configuration, enabling arbitrary installation of the product and maintaining long-term continuous balanced operation; This structure has a fast heat dissipation speed, ensuring the reliability of the fan even in high-pressure environments.

(4) The whole machine adopts an oil-free device, and the transmission system does not require lubrication. To broaden the application scope of the product, it can be used in medical equipment with strict air quality requirements, precision printing in the printing industry, and integrated circuit manufacturing processes in the electronics industry. At the same time, efficient work does not require other auxiliary equipment and reduces operating costs.

(5) The design of the impeller and air duct has been accurately calculated and verified. After optimizing the blade length, air duct curvature, and curvature, compared with similar products, the performance has been improved by more than 30% under the same power input, and the product has lower wind noise, with the whole machine running below 70 decibels.

Circular vortex air pumpMaintenance matters
1. Regularly check whether all fasteners are tightened, and tighten them promptly if any looseness is found.
2. Regularly check whether there is lubricating oil at each lubrication point. Ensure that the oil quality and quantity meet the requirements.
3. Regularly clean the dust and foreign objects in the dust removal fan.
4. Regularly check the vibration of the fan to ensure smooth operation. If vibration is found, the fan should be stopped for inspection and handling.
5. Regularly inspect the transmission belt for any signs of damage, breakage, missing numbers, elongation, slippage, etc. If any are found, they should be dealt with promptly.
6. Regularly clean and replace the filter element, and regularly maintain the motor.
7. Regularly check the gap dimensions of each part of the fan to prevent friction and collision between the rotating and fixed parts.
8. Regularly inspect the pipelines connected to the fan, clean the dirt and impurities inside the pipelines regularly, and prevent the fan from rusting.