Circular motion of threading machine equipment combined with polyurethane high-pressure foaming machine

Circular motion of threading machine equipment combined with polyurethane high-pressure foaming machine

Circular threading machine

The motor is5.5kwHollow shaft reducer or cycloidal pin reducer can be used according to the site

divided into2Section, with a length of14rice

Circulating double chain pipe threading machine, including a frame, characterized by:The rack is equipped with a transmission mechanism and a circular transport mechanism. The transmission mechanism is located inside the transport mechanism and drives the transport mechanism to move. Two push tube baffles and multiple support plates are installed outside the transport mechanism. The height of the push tube baffles is slightly higher than that of the support plates. The line connecting the corresponding positions of the two push tube baffles passes through the geometric center of the circular transport mechanism, and multiple support plates are evenly arranged along its circular structure on the outside of the transport mechanism.

The steel pipes that can be supported by a single row chain are219--1220If pouring large buried pipelines upwards, double row chains need to be used to increase the chain's load-bearing capacity

The hydraulic unsupported foam platform produced by our factory The model is Simple type 普通型 Six point positioning Eight o'clock positioning Ten point positioning

Hydraulic unsupported foaming platform It is used as a foam platform for pouring polyurethane pipes during use length14rice

The supporting equipment is Polyurethane high-pressure foaming machine Used for high-pressure casting of polyurethane and insulation foam casting of the space inside the jacket tube

Circular motion of threading machine equipment combined with polyurethane high-pressure foaming machine

Operating procedures:

1. Firstly, place the jacket tube on the hydraulic unsupported foaming platform, place the steel tube on the threading machine, and use the threading machine to insert the steel tube into the jacket tube

2. The steel pipe is placed inside the jacket pipe. Due to the hydraulic unsupported foaming platform equipped with telescopic oil cylinders in front and behind, the oil cylinders can be adjusted through an oil distributor to fix the steel pipe that enters the jacket pipe and achieve concentricity

3. The allocation of oil cylinders: There are a total of 7 oil cylinders in the front and rear of the hydraulic foaming platform, including 2 oil cylinders for controlling the lifting and lowering of the front and rear, 2 oil cylinders for controlling the expansion and contraction of the front and rear, and 1 oil cylinder for placing steel pipes into the flip cover. The foaming platform is divided into two sections, with 1 lifting and lowering oil cylinder at the bottom of each section, for a total of 2 cylinders, used to lift and clamp the pipes in a concentric manner