Polyurethane high-pressure foaming machine equipment used for interlayer insulation pouring

Polyurethane high-pressure foaming machine equipment used for interlayer insulation pouring

The tank body is a double-layer tank, equipped with a mixing motor and an airtight device on the upper part of the tank body

The cut-off doors are all made of copper to avoid the generation of iron shavings over time, which may affect their use

The volume of a single tank is250kilogram

According to customer requirements: the size of the individual flow rate, equipped with a material pump motor

Example:4kwMaterial pump motor equipment12mlDiagonal shaft pump, with a single flow rate of0.27Kilograms per second

The material pump motor is equipped with a frequency converter, which adjusts the flow rate by adjusting the speed

The mixing motor is1.5kw

The feeding motor is1.5kw

The oil pump motor is4kwEquipped with a pressure holding device

Measure the pressure of the material and oil, and the measuring device is a pressure relay. When the pressure of the material pump is too high, stop the material pump

Instrument power distribution: equipped with a microcomputer for setting pouring time, material measurement time, and workpiece start-up

Extend the upper arm to3.5Mi, the injection head is equipped with a pulley that can slide back and forth for easy pouring. The boom can move left and right, with a rotation angle of0-150°, the weight of the whole machine is1.2ton

Size is2.5*1.45*2.2rice

Polyurethane high-pressure foaming machine equipment used for interlayer insulation pouring

Used for pouring the interlayer of pipelines or the interlayer of boxes, different types of polyurethane foaming machines need to be selected according to the product specifications,

Example: For small refrigerators, a small flow mixing method should be used, with a mixing flow rate of 150-200g, and the time should be set according to the size of the product. The injection head is a circulating type, and the material and liquid circulate when not working. When working, it flows out from the injection port with a small flow rate to avoid splashing of the material and liquid

Example: Pouring the interlayer of the buried pipeline, with a length of 11.6 meters, requires high flow mixed pouring to reduce pouring time. It is necessary to cooperate with the boom, which is extended by 3 meters. The injection head is moved by front and rear hand push pulleys and up and down telescopic elevators for easy pouring operation. The injection head is equipped with an external handle

Tip: 1/Galanz plunger pump, does not require a frequency converter, can be adjusted through a handle for accurate discharge flow. 2/Diagonal shaft pump+frequency converter, can be adjusted through a frequency converter for temperature dependent discharge