Compressed air separator - precision filter

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

A compressed air separator is used to separate impurities such as condensed moisture and oil from compressed air, allowing for initial purification of the compressed air. The separated oil and water are discharged together from the sewage outlet.

Product Details

Compressed air separator

It is composed of a casing, separator, filter element, and sewage components. When compressed air containing a large amount of solid impurities such as oil and water enters the separator and rotates down its inner wall, the centrifugal effect generated causes oil and water to precipitate from the steam flow and flow down the wall to the bottom of the oil-water separator, and then be finely filtered by the filter element. Due to the use of folded coarse, fine, and ultrafine fiber filter materials, the filter element has high filtration efficiency (up to 98% or more) and low resistance. When gas passes through the filter element, it is firmly adhered to the filter material fibers due to the obstruction of the filter element, inertial collision, van der Waals forces between molecules, electrostatic attraction, and vacuum attraction, and gradually increases into droplets that drip into the bottom of the separator under the action of gravity. Discharged through the drain valve.

Product Features:
Pipeline filter, compact design, small volume, requires less space for maintenance, and is easy to install
● Large circulation path to reduce pressure drop
The filter element is made of imported filter material, with high filtration efficiency and a lifespan of up to 4000 hours
Using standard filter cartridges, easy to purchase and replace (no special tools required), with multiple filter cartridge grades to choose from
The import and export have threaded interface or flange connection types, and the direction of air flow is marked on the shell, making it easy to install
The shell comes in a variety of high-quality aluminum alloy, stainless steel, and carbon steel materials, with high pressure resistance and a smooth surface
● Optional differential pressure gauge, indicating the * time for replacing the filter
Optional liquid level indicator can be used to monitor the level of liquid and pay attention to preventive maintenance at any time to avoid downstream pollution
An automatic drainage device can be optionally installed to reduce human operation and loss of control.
Compressed air separator

Installation:

1. The device must be installed correctly, and qualified operators must follow the operating instructions for debugging and maintenance in order to ensure its safe operation.

2. Failure to close the isolation valve during installation and maintenance can cause damage to system components and harm to human health. The danger also includes shutting down protective devices, ventilation pipes, or alarm systems. Ensure that the isolation valve is closed to avoid system impact.

3. Pressure: During maintenance and repair, it is necessary to consider whether there is any medium in the oil-water separator pipeline. It is necessary to ensure that the pressure medium has been isolated and the safety airway has been connected to the atmosphere. This can be resolved by installing a vent valve. Even if the pressure gauge indicates zero, do not assume that the system is vented.

4. Temperature: After closing the isolation valve, it is necessary to allow a period of time for the operating area to approach room temperature to avoid burns.

5. Disposal: The product can be recycled.

Accuracy level:

Specification Model

On site physical image:

Physical picture of the case: