Ultrasonic energy meter

NegotiableUpdate on 05/15

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The ultrasonic energy meter integrates flow rate, integration, and display, and has the characteristics of low power consumption (one battery can be used for more than 5 years) and small size. Scope of application: Centralized cooling systems for residential units, buildings, district heating stations, central air conditioning, etc.

Product Details

Ultrasonic energy metersummary:
It is used to measure the UV energy of different light sources, especially on printing machines. Ensure that the printing and drying processes achieve ideal quality control. The spectral range that can be measured by the energy meter is 250-410 nanometers, and the optimal sensing peak spectral output is 330 nanometers. The relative value of the additional amount of light incident during the exposure cycle is included. Due to the irregular radiation distribution of the light source and the different structural designs of different manufacturers. So that different readings may occur under the same measurement conditions.

Features:
The body is a straight through integrated structure, made by precision casting technology.
Hollow structure, truly unobstructed water flow, especially suitable for China's heating water quality and working conditions requirements, with less pressure loss.
Simple structure, easy installation and maintenance.
*Not affected by impurities, chemicals, and magnetic materials in the medium, the operation is very stable and reliable.
The measuring structure has no movable parts, wear and tear, and the measurement accuracy is not affected by the service life.
Adopting imported microcontrollers from the United States and advanced low-power design. Only battery power is needed.
Using German imported ultrasonic detection chips for higher accuracy.
It can be installed horizontally or vertically, which is extremely convenient and practical.
Dual use of hot and cold water, dual use of inlet and outlet water.
Multiple communication methods can be selected (RS485, M-BUS, GSM remote signal transmission) (additional installation required)
Ultrasonic energy meter

Operation Instructions:

Please turn the switch of the instrument to the "ON" position every time it is used. The reading displayed on the LCD screen is "0" mj/cm2 (millijoules per square centimeter). If it is not for special purposes, please reset the reading to zero before each measurement.

If your process requires it, you can also measure repeatedly, and the reading after each measurement does not need to be zeroed. Therefore, the last reading displayed on the instrument will be the cumulative value of multiple repeated measurements.

When completing the measurement, the switch should be turned to the "OFF" position to promptly shut down the instrument. Proper operation will effectively extend the battery life of the instrument.

Technical Specifications:

Measuring caliber	DN6~DN300	working power supply	3.6V built-in battery
measuring medium	Cold water, hot water, or other liquids	display mode	Chinese LCD display
rated temperature	2~95℃	Display content	Cooling capacity, heat, inlet temperature, outlet temperature, temperature difference, flow rate, water volume, working time, date
rated pressure	1.6Mpa	display unit	℃，m3，kwh
working environment	0~50℃ IP65	output signal	4-20mA, RS485 (optional)

Overall dimensions:

The nominal Tongjing		DN15	DN20	DN25	DN32	DN40	DN50	DN65
Overall dimensions	L	130	130	130	160	180	200	200
	W	120	120	121	125	130	138	138
	H	86	86	89	98	109	170	170
connection method		threaded connection					flange connection
connection method		G1/2”	G3/4”	G1”	G11/4”	G11/2”	4-M16	4-M16

The nominal Tongjing		DN80	DN100	DN125	DN150	DN200	DN250	DN300
Overall dimensions	L	225	250	250	300	350	400	400
	W	186	205	230	265	350	385	445
	H	210	220	235	270	320	395	475
connection method		flange connectionpn1.6mpa				flange connectionpn1.0mpa
connection method		8-M16	8-M16	8-M16	8-M20	12-M20	12-M22	12-M22

Installation precautions:
There are several incorrect installation methods, please be very cautious and install correctly, otherwise it will damage the MKH ultrasonic thermometer.
Please do not hold the meter head with your hands before using a wrench to tighten the nut during installation. Because the header is made of plastic, it is easy to damage the header components. The correct way is to use a wrench to tighten the connecting pipe nuts on both sides;

When the heat meter is installed horizontally, the direction of the integrator is facing upwards. If the integrator is facing sideways, it will cause the transducers on both sides to not be on the same horizontal plane, and air may accumulate at the transducer at a higher height, resulting in inaccurate or inaccurate measurement of the heat meter;

When the heat meter is installed vertically, it must be installed on a straight pipeline with upward water flow, because the pipeline with downward water flow will be affected by the gravity of the earth, which will cause the water in the pipeline to be unable to fill the pipe section;
When installing the heat meter at the "U" - shaped pipe, please install the heat meter at the lowest point, as air may accumulate in the pipe at a higher location, causing the heat meter to not measure or measure accurately.
When installing a valve or other object on the heat meter, it is necessary to ensure that the distance between the meter box and the object is greater than 5 times the diameter of the pipe. When installing a valve or other object behind the meter, it is also necessary to ensure that there is a distance of at least 2 times the diameter of the pipe between the meter and the object, otherwise it may cause incorrect measurement of the heat meter.