Dissolving tank slurry mixer/device

Dissolving tank slurry mixer/device

1、 Product Introduction:
It is currently an ideal model with high automation, good mixing quality, high efficiency, low energy consumption, low noise, easy operation, fast unloading speed, long service life of lining plates and blades, and convenient maintenance.

The paddle mixer is suitable for mixing plastic, dry hard, lightweight aggregate concrete, as well as various types of mortar and sand paddles.

IIMain technical parameters and installation dimensions：

IIIConstruction and working process:

The mixer consists of a mixing shaft, mixing blades, a machine base, and a driving device.

When the raw water and coagulant or coagulant aid liquid flow through the mixing tank, flow circulation is generated under the discharge of the mixer, allowing the coagulant to mix quickly and thoroughly with water, meeting the requirements of the coagulation process.
Non standard, various specifications of mechanical mixers can be manufactured according to user conditions such as water quality, water temperature, corrosiveness, viscosity, etc.
Among them, there are various options for reducers, including domestic, imported, or cycloidal pin and gear reducers;
The mixing rod and mixing blade are made of various materials such as stainless steel, carbon steel anti-corrosion, and plastic;
There are multiple options for blade shapes, including two-page, three leaf, single-layer, double-layer, and frame style.

Dissolving tank slurry mixer/device

4、 Maintenance precautions:

1. The paddle mixing system requires maintenance personnel familiar with its structure and performance to regularly inspect and maintain the dosing mixer in order to ensure its long-term operation.

Before starting the paddle mixing system, oil must be added to the motor bearings, intermediate bearings, and gearbox. 2 # calcium lithium grease needs to be added to the motor bearings and intermediate bearings, and 30 # mechanical oil needs to be added to the gearbox, with the oil level reaching the center of the oil cup height.

3. Replace the lubricating oil for the motor bearings and intermediate bearings every six months (6 months) of operation. If the transmission oil is found to be lacking in the oil cup, lubricating oil should be replenished at any time. Every six months (6 months) of operation, all the oil in the transmission should be poured out and the lubricating oil should be replaced again.

4. Every year of operation of the gearbox, all lubricating oil inside the gearbox should be poured out and cleaned once with a cleaning agent. At the same time, check for severe wear and damage to the gears inside the gearbox. If necessary, replace the gears or gearbox.

5. Maintenance personnel need to regularly check the operation status. Check for any noise, overheating, or vibration exceeding the range of each bearing.