Drum scraper wastewater crystallizer

1Drum scraper wastewater crystallizerInstallation:

The installation of the Fan Jun drying equipment on this machine is based on the overall layout. The ground should be flat, and a pressure gauge and safety valve should be installed at the inlet of the steam pipe. The flange connections of each steam inlet should be firm.

2、 Maintenance:

Regularly check the flexibility of rotating parts and whether there is any jamming phenomenon. Chain wheels and other components should be lubricated regularly, and measuring devices such as pressure gauges should be calibrated regularly for errors. If there is severe wear on the triangular belt transmission components, they should be replaced in a timely manner. For maintenance of electric motors and reducers, please refer to the instructions for use and maintenance of electric motors and reducers.

3、 Debugging:

1. Tap the main motor to observe that the main drum rotates correctly.

2. Observe whether the main drum and various transmission components rotate flexibly, whether the steam inlet and outlet are connected, and whether the pressure gauge is within the working pressure range.

3. Start the motor, and the main drum runs smoothly. When the temperature rises, add materials, and then adjust the motor speed and the uniformity of materials on the drum film to control the final water content of materials.

4. Start the winch motor, output the crystallized product material, and adjust the speed of the winch motor according to the amount of crystallized product.

4Drum scraper wastewater crystallizersummary:

The HG series drum scraper type wastewater crystallizer produced by Fanjun Company is a new product developed by our factory, widely used in processes such as drying and slicing viscous and paste like materials. It has been used in industries such as food, chemical, and pharmaceutical with good performance.

5、 Working principle:

The working principle of the HG series drum scraper type wastewater crystallizer is to allow liquid or slurry like materials to form a thin film on the surface of the drum heated by water vapor or other heat carriers. The drum is dried during one rotation, and the product is scraped off with a scraper. The exposed surface of the drum comes into contact with the raw material again and forms a thin film for crystallization.