Wastewater evaporator (high salt wastewater treatment project)

NegotiableUpdate on 03/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Wastewater evaporator (high salt wastewater treatment project) This evaporator is suitable for the concentration of liquids such as traditional Chinese medicine, western medicine, glucose, starch, monosodium glutamate, dairy products, chemical industry, etc., especially for low-temperature vacuum concentration of thermosensitive materials. After careful calculation and design improvement, our company has achieved more benefits than the original features.

Product Details

3、 Main features:

1. Energy saving benefits, calculated according to SJN-1000 model, can save about 5400 tons of steam, 140000 tons of cooling water, more than 130000 kWh of electricity, and reduce costs by nearly 200000 yuan per year.

2. This evaporator adopts external heating natural circulation and vacuum negative pressure evaporation method, which has a fast evaporation speed, a high concentration ratio, and can reach 1.4 (for general Chinese herbal extracts), without the need for an open pot to collect the paste.

3. This evaporator adopts three effect simultaneous evaporation, and the secondary steam is reused repeatedly, reducing energy consumption by about 70% compared to single effect. In less than a year, the entire investment of this concentrator can be recovered from energy-saving costs.

4. Multi functional operation features:

(1) Can recycle alcohol with a concentration of around 80 degrees.

(2) Triple effect can concentrate three different materials.

(3) One effect, two effect, three effect, three effect, two effect, can be repeatedly combined into a pot to obtain paste.

(4) Intermittent and connected feed concentration is possible.

(5) It can be made into a paste at once, fed by *, and processed through the second and third effects to form a paste.

5. This evaporator has a special structure, and the concentrated material has a strong taste and uniform paste quality. The material can be concentrated without foam in the seal, so that it is not easy to run off and reduce pollution. The material is concentrated on the same day, so it is not easy to coke, and it is easy to clean. Open the upper and lower covers of the heater to clean, and save labor. One can be operated.

6. The evaporator and material contact parts are made of stainless steel SUS304, and the heater and evaporator are equipped with insulation layers outside. The insulation is made of polyurethane foam, and the outer surface is frosted and matte treated, which meets GMP standards.