Electronic descaling device

Due to considerationElectronic descaling deviceThere are differences in volume and weight, and the shipping cost to different places varies. For specific shipping costs, you can directly consult the customer service staff of Lijin Company.

Electronic descaling device type:

1. According to the selection of water treatment capacity, the diameter of the water processor should generally be equal to the diameter of the water pipe. If it does not match, a larger equipment should be selected.

2. The hardness of the water treated by this equipment is less than 500mg/L (calculated as CoCO3); haveCustomization is required.

3. This product is prohibited from being used on steam boilers or pipe rack boilers.

4. The L-shaped electronic water processor can be installed horizontally, vertically, or diagonally, and attention should be paid to the direction of the inlet and outlet.

5. Anti scaling, descaling, sterilization and algae removal, pipeline corrosion.

Maintenance and upkeep of electronic descaling device:

1. The electronic water processor has been tested before leaving the factory, and users are not allowed to open the host casing for debugging, otherwise it may cause damage to the circuit and equipment scrap.

2. After the entire water system is debugged and qualified, simply connect the 220V/50Hz power supply to the electronic descaling device (electronic water processor) to start running.

3. In order to prolong the service life of the electronic descaling device (electronic water processor), it is recommended that the electronic descaling device (electronic water processor) should also be powered off and stopped when the system stops running.

4. During operation, the fully enclosed circulation system should discharge at least once a month, with each discharge not less than 5% of the total water volume of the system; A semi closed loop system should be discharged at least once a week. Control the concentration factor not to exceed 4-5.

5. When the system operates seasonally or is out of service for a long time. An appropriate amount of extreme corrosion inhibitor should be added to the water before the system is shut down to reduce corrosion and protect the system; When the system is restarted, an appropriate amount of biocidal stripping agent should be added and rinsed to remove the biological sludge formed during shutdown

Working principle of electronic descaling device:

Electronic descaling device(Electronic descaling device) is a device that uses high-frequency alternating electromagnetic fields generated by electronic components to change the physical properties of water when it passes through a water treatment plant. The original chain like macromolecules break down into individual water molecules, increasing the dipole moment of the water molecules. Polarized individual water molecules surround the positive and negative ions that dissolve salt in the water, reducing the speed of salt ion movement and electrostatic attraction, greatly reducing the chance of collision and binding, and preventing the formation of scale, thus achieving the purpose of scale prevention. The dipole moment of polar water molecules increases, and the attraction between them and salt positive and negative ions increases, causing the existing scale on the heating surface or pipe wall to become soft, crack, and fall off on its own under the action of water force, thus achieving the purpose of scale removal. At the same time, the micro current in water destroys the living environment of microorganisms. In addition, the reactive oxygen species formed in water can oxidize the cell membrane of microorganisms, destroy their dismutation enzymes, and kill microorganisms in water, achieving the goal of sterilization and algae elimination.