Flammable Gas Explosion Limit (LEL) Analyzer (FTA)

M-2010-FTA 型Flammable Gas Explosion Limit (LEL) Analyzer (FTA)By using flame temperature detection (FTA) technology, the temperature change generated by the combustion of combustible gases can be quickly and accurately measured. It can simultaneously detect organic VOCs gases, inorganic explosive gases such as CO, H2, NH3, etc., and respond to all combustible gases. The measurement range can cover 0-100% LEL, providing safe and reliable real-time monitoring of explosion risks for various industries. It can be widely used for monitoring LEL explosion limits in petroleum and petrochemical industries, tank farms, and process pipelines.

The sample is drawn into the flame chamber of the analyzer, and the combustible gases and vapors in the sample ignite in the induction flameBurn it. The thermocouple located near the induction flame will convert the temperature rise generated into an electrical signal, and the temperature rise will be correlated with the combustible gasThe concentration of the lower limit of combustion (LEL) from 0 to 100% is directly proportional. In the flame chamber, a jet erupts from the end of the combustion tubeSmall 'induction flame'. The sample is continuously drawn into the flame chamber by the suction force generated by the jet pump through the sampling tube,Inject air into the flame chamber at a constant pressure, and the combustible gas in the sample burns in the induction flame and produces combustionThe temperature rise proportional to the lower limit of combustion is measured by a thermocouple located above the flame.

Product advantages
M-2010-FTAtypeFlammable Gas Explosion Limit (LEL) Analyzer (FTA)It has significant advantages in industries such as petroleum, chemical, and pharmaceutical, and its products have the following technical characteristics:
Fast response time: T90 ≤ 2S
Jet pump sampling, suitable for low-pressure sampling conditions
The system is heated throughout the entire process to avoid condensation and adsorption of organic matter in the sample gas
Can analyze almost all combustible gases
Multiple component gases can be measured using a single gas calibration method
Built in EPC flow control for stability
Stable and reliable measurement

Product application scenarios
LEL monitoring at the inlet of exhaust gas treatment equipment (RTO/RCO/incinerator, etc.)
Monitoring and warning of the lower explosive limit of solvent saturated air
Monitoring and Warning of Explosion Lower Limit in Oil Storage Tank Area
Monitoring and warning of lower limit of process pipeline explosion

technical indicators
Brand Mexcel Maiyue Environment
modelM-2010-FTA
Measurement of combustible organic and inorganic gases in components
Range LEL: (0)～100)%LEL
The analyzer is heated to 120 ℃, and other temperatures can be customized
Injection pressure -20～20kPa (gauge pressure)
Sampling flow rate of 2.5L/min
Repeatability ≤ 1%
Response time T90 ≤ 2S
Zero point and range drift ≤± 2% F.S./24h
Linear error ≤± 1% F.S
Communication protocol RS485, Modbus communication protocol
Size 650mm × 315mm × 800mm (L × W × H)
Weight 65kg, environmental humidity (0～95)%RH
Environmental temperature (-20 ° C)～50)℃
Working power supply 220 VAC, 50Hz
Power start 500W, run 150W
Explosion proof grade Ex db Px IIC T4 Gb