Fully intelligent voice 6-220kV wireless high-voltage nuclear phase analyzer portable multifunctional calibrator

Product Introduction:

Fully intelligent voice 6-220kV wireless high-voltage phase analyzerComposed of wireless receiver, detector, telescopic insulation rod, etc. The receiver adopts a 3.5-inch true color LCD screen, which displays the nuclear phase result, phase, frequency, and vector diagram indication on the same screen. There are voice prompts such as "X signal normal, Y signal normal, in-phase, out of phase", which are clear and intuitive.
This nuclear phase analyzer has the functions of a high-voltage voltage tester, a high-voltage phase meter, and a high-voltage phase sequence meter, which can be used for electrical testing, phase sequence testing, transformer group determination, etc.
Product features:
1. Receiving display: phase angle, frequency, voltage waveform.
2. The receiver comes with a rechargeable battery.
3. High sensitivity and good selectivity in signal acquisition.
4. High frequency transmission, strong adaptability, can pass through partitions and walls.
5. When exposed to a strong electric field being measured, the instrument will automatically sound an alarm.
6. Easy to operate, safe and reliable.
7. On site live verification.
8. Durable and with excellent sealing performance.
9. Lightweight and easy to carry.

Fully intelligent voice 6-220kV wireless high-voltage phase analyzerTechnical Specifications:

Functional high and low voltage wireless voice core phase, frequency, phase, phase sequence, and electrical testing

Power supply DC 3.7V rechargeable lithium battery, USB charging interface, continuous operation for about 10 hours

Transmission methods: 315MHz, 433MHz wireless transmission

Nuclear phase distance is about 1000m

Display mode: 3.5-inch true color LCD screen display

Range nuclear phase voltage level: AC 10V~550kV

Phase: 0.0 °~360.0 °

Frequency: 45Hz~75Hz

Resolution of 0.1 °; 0.1Hz

Accuracy (23 ℃± 5 ℃, below 80% RH) Phase: ≤± 10 °

Frequency: ≤± 2Hz

Differential qualitative and in-phase: -30 °~30 °; Heterophase: 90 °~150 ° and 210 °~270 °

Voice functions such as in-phase, out of phase, normal X signal, normal Y signal, etc

The insulation rod measures approximately 3.8m in length after stretching and 0.6m in length (3 sections) after shrinking

9999 sets of data storage

Nuclear phase contact method: Bare wires below 35kV or wires with safety insulation sheaths below 110kV directly contact the nuclear phase. (with insulated rod operation)

Non contact core phase: bare conductors above 35kV, or lines above 110kV use non-contact core phase. (with insulated rod operation)

Electrical inspection indicator detector beeps beep beep beep beep beep beep beep beep

Automatic gear shifting

Sampling rate 2 times per second

Instrument size detector: length, width, and thickness 145mm × 60mm × 48mm

Receiver: length, width, and thickness 250mm x 100mm x 40mm

Backlight control: Press the up and down arrow keys to adjust the backlight brightness

Induction intensity control: Depending on the strength of the induced electric field, the detector can automatically control the amplification factor, making it convenient for phase detection in densely populated areas

Press the HOLD key to hold the data in data retention test mode, and then press the HOLD key to cancel the hold

Exit function: Press the ESC key to exit the current function interface and return to the higher-level directory

After entering data search mode by pressing ENTER, press the arrow keys to browse through the stored data

No signal indication: When the receiver does not receive the transmitted signal, the "----" symbol is dynamically displayed

After about 15 minutes of automatic shutdown and startup, the instrument panel will automatically shut down to reduce battery consumption

When the battery voltage is below 3.2V:
Detector: The power indicator light flashes slowly to remind charging;
Receiver: Low battery voltage symbol display, reminding to charge

Rated current detector: 35mA max; Receiver: 300mA max

Instrument quality detector: 205g (including battery)

Receiver: 395g (including battery)

Insulation rod: 1.45kg

Total weight: 9.8kg (including instrument box)

Working temperature and humidity -10 ℃ to 40 ℃; Below 80% Rh

Storage temperature and humidity -10 ℃~60 ℃; Below 70% Rh