Gas generation/treatment of edible oil fume generator

Product Introduction

The harm of cooking fumes to human health is increasingly attracting social attention. Oil fume detectors, oil fume purifiers, and other industries have formed a considerable scale, closely related to the environment and residents' lives.This device is used for quantitatively and continuously generating cooking oil fumes, providing the necessary source of fumes for testing fume purifiers and fume detectors.

1. Working principle

By accurately measuring the flow rate of edible oil through a metering pump, the edible oil and a carrier gas (default indoor air, or inert gas provided by high-pressure gas cylinders) enter the high-temperature evaporation mixer. Use oil to be fully heated and smoke in a high-temperature evaporative mixer, and mix it thoroughly with the carrier gas before outputting. The output oil fume can be connected to the test air duct as a testing source.

2. Technical parameters

3. Component Description

1 Touch screen 2 Heating switch 3 System power switch 4 Main power switch 5 Triangle door lock 6 Power port 7 Air inlet 8 Liquid inlet 9 Oil fume generation module 10 Air outlet

4. Installation steps

4.1 Open the packaging box and place the equipment on the workbench;4.2 Connect the power cord to the power socket of the device and power it on;4.3 Connect the equipment outlet to the air duct inlet;4.4 Open the rear door of the device and check if there is enough oil in the fuel tank. If not, refuel.

5. Human computer interface

5.1 The front panel of the device has a touch screen and a simple user interaction interface (as shown in Figure 3).

5.2 Click on "Advanced Settings" to enter the parameter settings (as shown in Figure 4). After completing the parameter settings, click "Return" to enter the user interface and click "Start" or "Reset" to start the device operation.

5.3 If you encounter any problems during the use of the device, you can click "Contact Us" to solve them for you.

6. Operation process

6.1 Turn on the main power switch of the device6.2 Turn on the heating switch6.3 Set the required parameters such as oil fume evaporation rate in the advanced settings page6.4 Click the "Start Button" on the touchscreen operation homepage6.5 The equipment automatically operates according to the following process and outputs oil fume

6.6 When it is necessary to pause the process, click the "Pause" button on the main page, and click the "Start" button when it is necessary to continue; When you need to start over, first click the "Reset" button, and then click the "Start" button.

7. Precautions for product use and maintenance

7.1 Pay attention to the quality of edible oil;7.2 Be careful not to direct the oil fume outlet towards the staff or equipment, as the output oil fume temperature is high