High voltage electrostatic water processor electronic descaling instrument ion rod

1、 Introduction to ion rod electrostatic water processor:

Ionic rod electrostatic water processorIt is composed of an ion rod probe and a power box. The ion rod probe is an aluminum electrode rod coated with polytetrafluoroethylene on its surface, with both ends sealed and insulated. The power box is a high-voltage electrostatic generator, with an input of 220V, 50Hz AC and an output of 7500V DC. The high-voltage DC is transmitted to the ion rod probe through a connecting cable. At the probe of the ion rod, an electrostatic field is generated, and the current is less than 1mA; it belongs to the intrinsic safety type, so there is no electrolytic effect and no risk to personal safety.
2、 Ionic rod electrostatic water processor functions and uses:
Ionic rod water processorIt has the characteristics of easy use, stable performance, long service life, and no secondary pollution, and is gradually being applied in industrial circulating water systems and central air conditioning systems for descaling, anti scaling, sterilization, and algae removal. Due to its significantly reduced cost compared to traditional methods, minimal maintenance, and no secondary pollution, it is gradually replacing traditional chemical methods and can be regarded as a successive revolution in the water treatment industry.
3、 Working principle of ion rod electrostatic water processor:
◆ Anti scaling:
The ion rod changes the electronic structure of water molecules through the direct action of a high-voltage electrostatic field of ≥ DC7500V (up to 20000V). The water dipole surrounds the anions and cations in the water and arranges them in a strong and neat chain in positive and negative order, preventing them from moving freely. The cations in the water do not tend towards the wall, preventing calcium and magnesium ions from forming scale on the wall, thus achieving the purpose of scale prevention.
◆ Scale removal:
Due to the effect of static electricity, the binding force between scale molecules and the crystal structure can be changed in structural crystals, promoting the loosening of hard scale and increasing the dipole distance of water dipoles, enhancing their hydration ability with salt ions, thereby increasing the dissolution rate of scale. This allows the already generated scale to gradually erode and fall off under the erosion of water flow, achieving the purpose of scale removal.
◆ Rust removal:
Rust scale is a type of scale, and removing it can remove rust.
◆ Sterilization and algae killing:
ion stickGenerate a certain amount of reactive oxygen species such as CO2-, OH, H2O2, which can destroy the ion channels of biological cells, alter the biological field in which bacteria and algae survive, affect bacterial physiological metabolism, and thus play a role in killing bacteria and algae.
◆ Corrosion prevention and inhibition:
Reactive oxygen species produce a thin oxide film on the metal surface in a scale free system to prevent corrosion, and due to their bactericidal and algaecidal effects, greatly reduce biofouling and the corrosion caused by it.
4、 Characteristics of ion rod electrostatic water processor:
1. High voltage
Imported chips with output voltage greater than 7500V, up to 20000V (can be tested on site). High voltage, good anti scaling, descaling, corrosion inhibition, sterilization and algae killing effects;
2. Teflon protection
The electrode rod probe is equipped with a Teflon protective layer, which can withstand 20000V high voltage, has good insulation effect, and good safety performance.
Teflon can also prevent impurities in water from adhering to the probe, allowing the probe to function effectively for a long time and making it easy to clean.
3. Conical thread connection, simple and convenient installation. Traditional flange connection is replaced with a tapered thread connection, saving installation costs. Loading and unloading are simple, convenient, and well sealed;
4. Rod design, novel structure, saves manufacturing costs. Adopting a rod design, the pipeline itself is used to replace the shell, saving manufacturing costs. There is no worry about bulky pipeline products, and the product is compact and exquisite;
5. Imported cable connectors, resistant to -40 ℃ low temperature, can be connected freely at any time, sealed well, and protect the high-voltage generator chip from moisture or corrosive gases.
6. Plug in cable connection is fast, convenient, and has good sealing properties, protecting electrical components inside the control box from moisture or corrosive gases.
7. Low installation and operation costs
Easy to install, does not take up space, and does not require additional valves or bypasses.
B has low labor consumption.
C does not require human responsibility, saving labor costs.
8. Flexible usage form, can be used in a single unit, and can be used in multiple units simultaneously for high flow systems.
9. Advanced technology
Compared with similar products, on the basis of cylindrical electronic water processors, removing the shell and bracket, connecting with threads, and disassembling is simple.
Design remote control instruments so that operators can keep track of equipment usage at any time. (User selected)
The water quality report can be automatically detected and printed, making it clear at a glance in computer software. (User selected)
10. Long service life - In order to ensure the long service life of the entire equipment, the ion rod water processor uses high-quality components with a service life of 10-15 years.
11. Safe use - Although the voltage of the ion rod water processor is high, the current is less than 1mA, and there is no dielectric effect that endangers personal safety.
12. Compliant with environmental requirements - ion rod water treatment equipment is a physical process that does not undergo chemical reactions or produce chemicals in water. The discharged water has no impact on the environment that humans rely on for survival and complies with relevant environmental regulations and standards.