Laser wave ranging sensor

NegotiableUpdate on 04/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The laser wave ranging sensor can be used for liquid level, material level detection, liquid level and material level detection to ensure a stable output when the liquid level has foam or large shaking, and echo is difficult to detect.

Product Details

The laser wave distance measuring sensor adopts the ultrasonic echo distance measuring principle and precise time difference measurement technology to detect the distance between the sensor and the target. The small angle and small blind area ultrasonic sensor developed by our factory has the advantages of accurate measurement, non-contact, waterproof, anti-corrosion, low cost, etc. It can be applied to the liquid level, material level detection, liquid level and material level detection methods to ensure a stable output when the liquid level has foam or large shaking, and it is difficult to detect the echo.

　　Connection method:

Brown wire: positive power supply -12 or 24V

Black line: Negative power supply

White line: Earth

Blue line: signal output

　Scope of application

Material level measurement

Adjacent area measurement

Human body measurement

Robot ranging sensor

Automatic navigation

Multi sensor navigation

Distance measurement

Industrial sensors

　　Output signal:0-5V.0-10V，NPN,PNP

　　Product Features

Direct detection mode; The distance signal is obtained by measuring the time difference between the ultrasonic signal emitted and the feedback signal, and then processed by a high-speed chip to convert it into the desired signal or voltage.

　　Technical Specifications:

Product Model	LM-112-005
measurement range	200~3000mm
blind spot	200mm
Standard testing board	30x30cm
Sensor frequency	112KHz
Working Voltage	12 or 24V DC
output method	0-5V, 0-10V, NPN or PNP
Operating Temperature	-35°C~+70°C
Storage temperature	-40°C~+80°C
lead length	2 meters (if extension is required, additional cable fees will be charged)
housing material	ABS engineering plastic, copper nickel plating
measurement accuracy	millimeter-level

Note: The beam angle is 15 degrees, with an upper and lower angle of 7.5 degrees. The measurement range can be customized within 0.2-3 meters according to customer requirements (measuring the farthest distance of the human body at 2 meters, the wall liquid level at 3 meters), such as 0.2-2.0 meters, 0.2-3.0 meters, etc.