Three-axis vibration sensor

Three-axis vibration sensorThe built-in piezoelectric element senses vibration acceleration, and through high-precision integrated circuits, converts the effective value of acceleration or the integrated effective value of velocity into a corresponding range of 4-20mA current output for remote display and control; Very suitable for connecting to DCS, PLC, and data acquisition systems.

Features:

1. The two-wire loop system makes the use and maintenance of the transmitter more convenient and economical;

2. Fault tolerant technology, allowing for arbitrary polarity connection between two loop wires;

3. Low power consumption and high stability measurement circuit ensure high-precision current output corresponding to linear vibration values;

4. Piezoelectric core, integrated structure, long lifespan, sturdy and durable, suitable for various harsh environmental situations;

Three-axis vibration sensorTechnical Specifications:

Power supply:+24 ± 10% Vdc power supply, maximum power consumption 0.5W;

Measurement range: 0-10g or 0-100mm/s; (Range optional)

Frequency range: 10-1000Hz;

Sensitive direction: axial, installed in any direction/angle;

Lateral sensitivity: ≤ 3%;

Electrical isolation: 500VRMS, circuit and housing isolation;

Current output: standard two-wire system 4-20mA output;

Accuracy (proportional to the effective value of measured vibration): ± 1%; (Maximum load: 500 Ω)

Impact limit: 1000g;

Mass: 0.2Kg;

Size: 24 * 60mm

Installation: M10 * 1.5 or M8 * 1.25 screws or magnetic seat

Protection level: IP68

Operating environment: -30~100 ℃;

Relative humidity: not greater than 95%, no condensation.